Toolbars

This section describes the various toolbar commands available in the Generative Shape Design workbench.
The toolbars are located on the right in the default set-up except for Tools, Measure and Analysis toolbars which are located along the bottom and User Selection Filter toolbar which appears when checked in the View -> Toolbars menu bar.

Select Toolbar
Insert Toolbar
Wireframe Toolbar
Law Toolbar
Surfaces Toolbar
Operations Toolbar
Replication Toolbar
Advanced Surfaces Toolbar
Developed Shapes Toolbar
Volumes Toolbar
BiW Templates Toolbar
Apply Material Toolbar
Measure Toolbar
Tools Toolbar
Constraints Toolbar
Annotations Toolbar
Views/Annotation Planes Toolbar
Analysis Toolbar
User Selection Filter Toolbar

Select Toolbar

	See Select Sub-toolbar below
	See Scan Sub-toolbar below

Select Sub-toolbar

	`Select` See Selecting Using The Selection Traps
	`Selection Trap` See Selecting Using The Selection Traps
	`Intersecting Trap` See Selecting Using The Selection Traps
	`Polygon Trap` See Selecting Using The Selection Traps
	`Paint Stroke Selection` See Selecting Using The Selection Traps
	`Outside Trap Selection` See Selecting Using The Selection Traps
	`Intersecting Outside Trap Selection` See Selecting Using The Selection Traps

Scan Sub-toolbar

	`Quick Select`See Quick Selection of Geometry
	`Scan or Define In Work Object` See Scanning the part and Defining In Work Objects

Insert Toolbar

	See Insert Sub-toolbars below

Insert Sub-Toolbars

	`Body` Inserting a New Body in the Part Design User's Guide
	`Body in a Set` See Inserting a Body into an Ordered Geometrical Set

	`Geometrical Set` See Managing Geometrical Sets
	`Ordered Geometrical Set` See Managing Ordered Geometrical Sets

Wireframe Toolbar

	See Points Sub-toolbar below
	See Line-Axis Sub-toolbar below
	`Plane` See Creating Planes
	See Projection-Combine Sub-toolbar below
	See Offset2D3D Sub-toolbar below
	`Intersection` See Creating Intersections
	See Circles-Conic Sub-toolbar below
	See Curves Sub-toolbar below

Law Toolbar

Law
See Creating Laws

Points Sub-toolbar

	`Point` See Creating Points
	`Points Creation Intersection` See Creating Multiple Point and Planes

Line-Axis Sub-toolbar

	`Line` See Creating Lines
	`Axis` See Creating an Axis
	`Polyline` See Creating Polylines

Project-Combine Sub-toolbar

	`Projection` See Creating Projections
	`Combine` See Creating Combined Curves
	`Reflect Line` See Creating Reflect Lines

Offset2D3D Sub-toolbar

	`Parallel Curve` See Creating Parallel Curves
	`3D Curve Offset` See Create a 3D Curve Offset

Circle-Conic Sub-toolbar

	`Circle` See Creating Circles
	`Corner` See Creating Corners
	`Connect Curve` See Creating Connect curves
	`Conic` See Creating Conic Curves

Curves Sub-toolbar

	`Spline` See Creating Splines
	`Helix` See Creating a Helix
	`Spiral` See Creating Spirals
	`Spine` See Creating a Spine
	`Isoparametric Curve` See Creating Isoparametric Curves

Surfaces Toolbar

	See Extrude-Revolution Sub-toolbar below
	See OffsetVar Sub-toolbar below
	See Sweeps Sub-toolbar below
	`Fill` See Creating Filling Surfaces
	`Multi-sections Surface` See Creating Multi-Sections Surfaces
	`Blend` See Creating Blended Surfaces

Extrude-Revolution Sub-toolbar

	`Extrude` See Creating Extruded Surfaces
	`Revolve` See Creating Revolution Surfaces
	`Sphere` See Creating Spherical Surfaces
	`Cylinder` See Creating Cylindrical Surfaces

OffsetVar Sub-toolbar

	`Offset` See Creating Offset Surfaces
	`Variable Offset`See Creating Variable Offset Surfaces
	`Rough Offset`See Creating Rough Offset Surfaces

Sweeps Sub-toolbar

	`Sweep` See Creating Swept Surfaces
	`Adaptive Sweep` See Creating Adaptive Swept Surfaces

Operations Toolbar

	See Join-Healing Sub-toolbar below
	See Trim-Split Sub-toolbar below
	See Extracts Sub-toolbar below
	See Fillets sub-toolbar below
	See Transformations Sub-toolbar below
	`Extrapolate` See Extrapolating Curves and Extrapolating Surfaces

Join-Healing Sub-toolbar

	`Join` See Joining Surfaces or Curves
	`Healing` See Healing Geometry
	`Curve Smooth` See Smoothing Curves
	`Untrim` See Restoring a Surface
	`Disassemble` See Disassembling Elements

Trim-Split Sub-toolbar

	`Split` See Splitting Geometry
	`Trim` See Trimming Geometry

Extracts Sub-toolbar

	`Boundary` See Boundary Curves
	`Extract` See Extracting Geometry
	`Multiple Extract` See Extracting Multiple Elements

Fillets Sub-toolbar

	`Shape Fillet` See Creating Bitangent Shape Fillets or Creating Tritangent Shape Fillets
	`Edge Fillet` See Creating Edge Fillets
	`Variable Radius Fillet` See Creating Variable Radius Fillets or Creating Variable Bi-Tangent Circle Radius Fillets Using a Spine
	`Chordal` `Fillet` See Creating Chordal Fillets
	`Styling` `Fillet` See Styling a Fillet
	`Face-Face Fillet` See Creating Face-Face Fillets
	`Tritangent Fillet` See Creating Tritangent Fillets

Transformations Sub-toolbar

	`Translate` See Translating Geometry
	`Rotate` See Rotating Geometry
	`Symmetry` See Performing a Symmetry on Geometry
	`Scaling` See Transforming Geometry by Scaling
	`Affinity` See Transforming Geometry by Affinity
	`Axis to Axis` See Transforming Elements From An Axis To Another

Replication Toolbar

	See Repetitions Sub-toolbar below
	See Patterns Sub-toolbar below
	`Duplicate Geometrical Set` See Duplicating Geometrical Sets and Ordered Geometrical Sets
	See Power Copy Sub-toolbar below
	See UserFeature Sub-toolbar below

Repetitions Sub-toolbar

	`Object Repetition` See Repeating Objects
	`Points Creation Repetition` See Creating Multiple Points and Planes
	`Planes Between` See Creating Planes Between Other Planes

Patterns Sub-toolbar

	`Rectangular Pattern`See Creating Rectangular Patterns
	`Circular Pattern`See Creating Circular Patterns
	`User Pattern`See Creating User Patterns

Power Copy Sub-toolbar

	`PowerCopy Creation` See Creating Power Copies
	`Save In Catalog` See Saving Power Copies into a Catalog

UserFeature Sub-toolbar

	`UserFeature Creation` See Creating User Features
	`Save In Catalog` See Saving User Features into a Catalog

Advanced Surfaces Toolbar

	`Bump` See Creating Bumped Surfaces
	`Wrap Curve` See Deforming Surfaces Based on Curve Wrapping
	`Wrap Surface` See Deforming Surfaces According to Surface Wrapping
	`Shape Morphing` See Deforming Surfaces According to Shape Morphing

Developed Shapes Toolbar

	`Unfold` See Unfolding a Surface
	`Transfer` See Transferring Elements
	`Develop` See Developing Wires and Points

Volumes Toolbar

	`Volume Extrude` See Creating Extruded Volumes
	`Volume Revolve` See Creating Revolution Volumes
	`Multi-sections Volume` See Creating Multi-Sections Volumes
	`Volume Sweep` See Creating Swept Volumes
	`Thick Surface` See Creating a Thick Surface
	`Close Surface` See Creating a Close Surface
	See Volume drafts Sub-toolbar below
	`Shell` See Creating a Shell
	`Sew Surface` See Creating a Sew Surface
	`Thickness` See Creating Thicknesses
	See Volumes operations Sub-toolbar below

Volume Drafts Sub-toolbar

	`Draft Angle` See Creating a Draft
	`Variable Draft Angle` See Creating a Variable Angle Draft
	`Draft Reflect Line` See Creating a Draft From Reflect Lines

Volumes Operations Sub-toolbar

	`Add` See Adding Volumes
	`Remove` See Removing Volumes
	`Intersect` See Intersecting Volumes
	`Union Trim` See Trimming Volumes

BiW Templates Toolbar

	`Junction` See Creating Junctions
	`Diabolo` See Creating a Diabolo
	See Holes Sub-toolbar below
	`Mating Flange` See Creating a Mating Flange
	`Bead` See Creating a Bead

Holes Sub-toolbar

	`Hole` See Creating a Hole
	`Hole Curve` See Creating a Hole Curve

Apply Material Toolbar

Apply Material
See Applying Materials Onto Surfaces

Measure Toolbar

	`Measure Between` See Measuring Minimum Distances and Angles
	`Measure Item` See Measuring Properties
	`Measure Inertia` See Measuring Inertia

Tools Toolbar

	`Update All` See Updating Parts
	`Manual Update mode`See Manually Updating a Part
	`Create 3DAxisSystem` See Defining an Axis System
	`Show Historical Graph` See Using the Historical Graph
	See Grid Sub-toolbar below
	See 2D Visualization Mode Sub-toolbar below
	`Mask` See Creating Masks
	`Create Datum` See Creating Datums
	`Temporary Analysis Mode` See Creating Offset Surfaces
	I`nsert Mode` See Inserting Elements
	See KeepNoKeep Sub-toolbar below
	`Only Current Body` See Display in the Part Design User's Guide
	See Instantiation Sub-toolbar below
	`Select current tool` See Selecting Bodies

Grid Sub-toolbar

	`Work On Support` See Working with a Support
	`Work On Support 3d` See Working with a 3D Support
	`Snap To Point` See Working with a Support
	`Work Supports Activity` See Working with a Support
	`Grid Featurization Switch` See Working with a 3D Support
	`Plane System` See Creating Plane Systems

2D Visualization Mode Sub-toolbar

	`Pickable visible background` See Managing the Background Visualization
	`No 3D background` See Managing the Background Visualization
	`Unpickable background` See Managing the Background Visualization
	`Low intensity background` See Managing the Background Visualization
	`Unpickable low intensity background` See Managing the Background Visualization
	`Lock` See Managing the Background Visualization

KeepNoKeep Sub-toolbar

	`No Keep Mode` See Keeping the Initial Element
	`Keep Mode` See Keeping the Initial Element

Instantiation Sub-toolbar

	`Catalog Browser` See Instantiating Power Copies Using the Catalog
	`Instantiate From Document` See Instantiating Power Copies

Constraints Toolbar

	See Creating Constraints
	See Creating Constraints

Annotations Toolbar

See Annotations Sub-toolbar below

Annotations Sub-toolbar

	`Text With Leader` See Creating a Text With Leader
	`Flag Note With Leader` See Creating a Flag Note With Leader

Views/Annotation Planes Toolbar

See Views/Annotation Planes Sub-toolbar below

Views/Annotation Planes Sub-toolbar

	`Front View/Annotation Plane` See Creating a Front View
	`Section View/Annotation Plane` See Creating a Section View
	`Section Cut/Annotation Plane` See Creating a Section Cut View

Analysis Toolbar


	See Analysis Sub-toolbar below

Analysis Sub-toolbar

	`Connect Checker` See Checking Connections between Surfaces
	`Curve Connect Checker` See Checking Connections between Curves
	`Feature Draft Analysis` See Performing a Draft Analysis
	`Surfacic Curvature Analysis` See Performing a Surface Curvature Analysis
	`Porcupine Analysis` See Performing a Curvature Analysis
	`Apply Dress-Up` See Setting Dress-Up Options
	`Remove Dress-Up` See Setting Dress-Up Options
	`Geometric Information` See Displaying Geometric Information on Elements
	`WYSIWYG Mode` See Working With the WYSIWYG Mode

User Selection Filter Toolbar

	`Point Filter` See Selecting Using A Filter
	`Curve Filter` See Selecting Using A Filter
	`Surface Filter` See Selecting Using A Filter
	`Volume Filter` See Selecting Using A Filter
	`Feature Element Filter` See Selecting Using A Filter
	`Geometrical Element Filter` See Selecting Using A Filter
	`Intersection Edges Selection` See Selecting Using A Filter
	`Work On Support selection state` See Selecting Using A Filter
	`Quick Select` See Selecting Using A Filter