Menu Bar

Tasks corresponding to general menu commands are described in the Infrastructure User's Guide. Refer to the Menu Bar section.

Insert

	For...	See...
	Sketcher...	Refer to Sketching in the Sketcher User's Guide.
	Sheet Metal Parameters...	Managing the Default Parameters
	Walls Recognition...	Creating Walls from an Existing Part
	Wall...	Creating Walls from a Sketch
	Wall on Edge...	Creating Walls from an Edge
	Extrusion...	Extruding
	Bends	Insert -> Bends
	Swept Walls	Insert -> Swept Walls
	Unfold	Insert -> Unfold
	ShePocket	Insert -> ShePocket
	Stampings	Insert -> Stampings
	Patterns	Insert -> Patterns
	CornerRelief...	Creating a Local Corner Relief
	Corners	Insert -> Corners
	Mapping...	Mapping Curves
	Save As DXF...	Saving As DXF
	Constraints	Setting Constraints in the Part Design User's Guide
	Advanced Replication Tools	Insert -> Replication Tools
	Instantiate From Document...	Instantiating PowerCopies

Insert -> Bends

	For...	See...
	Automatic Bends	Generating Bends Automatically
	Bend	Creating Bends From Walls
	Conic Bend	Creating Conical Bends
	Bend	Generating a Bend from a Line

Insert -> Swept Walls

	For...	See...
	Flange	Creating a Flange
	Hem	Creating a Hem
	Tear Drop	Creating a Tear Drop
	Swept Flange	Creating a Swept Flange

Insert -> Unfold

	For...	See...
	Unfold	3D View
	MultiView	Concurrent Access

Insert -> ShePocket

	For...	See...
	Cutout...	Creating a Cutout
	Split...	Splitting Geometry

Insert -> Stampings

	For...	See...
	Point Stamp	Creating a Point Stamp
	Extruded Hole	Creating an Extruded Hole
	Curve Stamp	Creating a Curve Stamp
	Surface Stamp	Creating a Surface Stamp
	Bridge	Creating a Bridge
	Louver	Creating a Louver
	Stiffening Rib	Creating a Stiffening Rib
	User Stamping	Creating User-Defined Stamping Features

Insert -> Patterns

	For...	See...
	Rectangular Pattern	Creating Rectangular Patterns
	Circular Pattern	Creating Circular Patterns
	User-Defined Pattern	Creating User-Defined Patterns

Insert -> Corners

	For...	See...
	Corner	Creating Corners
	Chamfer	Creating Chamfers

Insert -> Replication Tools

	For...	See...
	PowerCopy Creation	Creating PowerCopies
	PowerCopy Save in Catalog	Saving PowerCopies