Using SheetMetal Design assumes that you are in a CATPart document.
|
|
This section explains and illustrates how to use or modify various kinds of features. The information you will find is listed below. |
|
|
Using SheetMetal Design assumes that you are in a CATPart document. |
 |
Edit the parameters: select the Parameters tab, the wall thickness and bend radius values. |
|
|
Modify the bend extremities : select the Bend Extremities tab and choose a predefined bend type. |
|
|
Define the bend corner relief: select the Bend Corner Relief tab and choose a predefined corner relief type. |
|
|
Define the bend allowance: select the Bend Allowance tab and define the allowance value (K factor). |