What's New?
New Functionalities
- Manually
Updating a Part
- Allows you to
manually update a part that has just been modified.
-
Creating Chordal Fillets
- Allows you to create chordal fillets.
- Styling a Fillet
- Allows you create an ACA fillet surface between two given surfaces.
- Setting Small Scale Support
- Allows you to define a unique geometrical range from 0.01µm
to 1m.
Enhanced Functionalities
-
Creating Points
- Allows you to
create points using the Compass Location button.
- Creating Edge Fillets
- Allows you to vary the section of the fillet using the
Conical parameter
option. You can also create a tangency
continuous intersection edge ensuring that the intersection edge
remains tangency continuous even after update.
- Creating Adaptive Swept
Surfaces
- Allows you to deactivate or activate adaptive sweep sections.
- Creating Swept Surfaces
- Allows you to fill twisted areas
- Creating Fill Surfaces
- Displays gaps on surfaces, and allows you to fill the gaps.
- Extracting Geometry
- Allows you to create a tangency continuous intersection edge
ensuring that the intersection edge remains tangency continuous even
after update.
- Extracting Multiple Elements
- Allows you to create a tangency continuous intersection edge
ensuring that the intersection edge remains tangency continuous even
after update.
-
Splitting Geometry
- Ignore no intersecting elements option allows you to split many surfaces when the cutting
element does not intersect all the surfaces, while
Keep elements in half space option allows you to keep the elements in one half
space defined by the cutting plane.
- Creating a Diabolo
- Allows you to create a diabolo by specifying
different angles on
various edges. You can also invert the orientation of the diabolo.
- Creating a Bead
- Allows you to select a Reference Element to
stabilize the orientation of the bead.
- Creating a Mating Flange
- Allows you to create a mating flange on a surface with a hole.
-
Unfolding a Surface
- Allows you to unfold a surface even if the reference origin lies on
a edge to tear.
-
Reordering Features
- Allows you to replug features that use sub-elements (such as edges,
faces, and vertices) on the features on which they resolve themselves.
-
Creating
Blended Surfaces
- Allows you to create a ruled developable surface.
- Smoothing Deviation
- Allows you to smooth out surfaces in order to perform 1 or 2 offsets
while creating a thick surface,
thickness, or
shell.
-
Creating a Face-Face Fillet
- Allows you to specify the edge(s) of support body to be kept, and
creates Fillet Surfaces with Hold Curve and Keep Edge as support
wherever necessary
-
Synchronization
- Allows the Scan or Define In Work Object command to work
independently on each side of the Comparison window.
-
Transferring Elements
- Allows you to map any wireframe feature from 3D to 2D and vice
versa.
- Creating Variable Offset
Surfaces
- Allows you to offset a surface by specifying a
variable or constant
offset to sub-parts of a surface. You can also
reverse the offset
direction.
- Filleting Surfaces
- Allows you to vary
the section of the fillet using the
Conical parameter option while creating
face-face fillets,
variable radius fillets and
bitangent shape fillets.
-
Updating Parts
- Allows you to view the
parents
of the element in error and thus understand the origin of the
error.
-
Connect Checker
- Allows you to check connections between
surfaces,
between
curves, and
between
curves and surfaces.
Also allows you to set
tolerance values.
-
-
-
-
-
-