Machining Operations Toolbar

The Advanced Machining workbench includes one specific icon toolbar: the Machining Operations toolbar. The other toolbars in the workbench are common to all the Machining products and are described in the NC Manufacturing Infrastructure User's Guide.

The Machining Operations toolbar contains the commands for creating and editing 2.5 to 5-axis Milling and Drilling operations.

The icons for creating and editing 2.5-axis Milling operations are as follows.

	See Create a Pocketing Operation
	See Create a Facing Operation
	See Create a Profile Contouring Operation
	See Create a Curve Following Operation
	See Create a Point to Point Operation
	See Create a Groove Milling Operation
	See Create a 4-Axis Pocketing Operation

The icons for creating and editing 3-axis Milling operations are as follows.

	See Create a Sweep Roughing Operation
	See Create a Roughing Operation
	See Create a Plunge Milling Operation
	See Create a Cavities Roughing Operation
	See Create a Sweeping Operation
	See Create a Pencil Operation
	See Create a ZLevel Operation
	See Create a Contour Driven Operation
	See Create a Spiral Milling Operation
	See Create an Isoparametric Machining Operation

The icons for creating and editing multi-axis Milling operations are as follows.

	See Create a Multi-Axis Sweeping Operation
	See Create a Multi-Axis Contour Driven Operation
	See Create a Multi-Axis Curve Following Operation
	See Create a Multi-Axis Isoparametric Operation
	See Create a Multi-Axis Spiral Milling Operation
	See Create a Multi-Axis Flank Contouring Operation
	See Create a Multi-Axis Tube Machining Operation
	See Create a 4-Axis Curve Sweeping Operation
	See Create a Multi-Axis Helix Machining Operation

The icons for creating and editing Drilling operations as follows.

	See Create a Drilling Operation
	See Create a Spot Drilling Operation
	See Create a Drilling Dwell Delay Operation
	See Create a Drilling Deep Hole Operation
	See Create a Drilling Break Chips Operation
	See Create a Tapping Operation
	See Create a Reverse Threading Operation
	See Create a Thread without Tap Head Operation
	See Create a Boring Operation
	See Create a Boring and Chamfering Operation
	See Create a Boring Spindle Stop Operation
	See Create a Reaming Operation
	See Create a Counterboring Operation
	See Create a Countersinking Operation
	See Create a Chamfering Two Sides Operation
	See Create a Back Boring Operation
	See Create a T-Slotting Operation
	See Create a Circular Milling Operation
	See Create a Thread Milling Operation
	See Create a Sequential Axial Operation
	See Create a Sequential Groove Operation