7318 Model S20 Guide and Reference

<BODY BGCOLOR="FCFBF0"> <CENTER> <FONT COLOR="#A62A2A" SIZE="+2"> </FONT> </CENTER> <HR> <H1><a href="edn.htm#p4YHm350joyc">Second Edition (April 1996)</a></H1> <H1><a href="trademar.htm#A3DCACDC846janb">Trademarks and Acknowledgements</a></H1> <H1><a href="comstate.htm#E887B30918vick">Communications Statements</a></H1> <H1><a href="safety.htm#A3DCAD11901janb">Safety Notices</a></H1> <H2><a href="cableplu.htm#DC6D019175trau">Power Cables and Plugs</a></H2> <H1><a href="about.htm#DA300CB293trau">About This Book </a></H1> <H1><a href="serialco.htm#DC6D02A649trau">Chapter 1. Serial Communications Network Server (7318) Overview</a></H1> <H2><a href="overvhws.htm#DA1BF90749trau">7318 Hardware and Software</a></H2> <H2><a href="overvhw.htm#DA1BF90838trau">7318 Hardware Overview</a></H2> <H2><a href="overvsw.htm#DA1BF93304trau">7318 Software Overview</a></H2> <H1><a href="7813seri.htm#dDgck1cavick">Chapter 2. Serial Communications Network Server (7318) Installation</a></H1> <H2><a href="installh.htm#MQzQh395dee">7318 Hardware Installation</a></H2> <H2><a href="installs.htm#thoLmbjoyc">Installing 7318 Software for Version 3.2</a></H2> <H2><a href="installt.htm#tEYHm11joyc">Installing 7318 Software for Version 4.1</a></H2> <H2><a href="installu.htm#tgRBo2e2joyc">Installing 7318 Software for AIX Version 4.2 (or later)</a></H2> <H2><a href="loadfrmh.htm#D8A0D51359trau">Enabling a 7318 to Load from a Host</a></H2> <H2><a href="dirload.htm#xFYHm393joyc">7318 Directed Load</a></H2> <H2><a href="loadnona.htm#D8A0D52834trau">Suggestions for Loading from a Non-AIX Host</a></H2> <H2><a href="remsw32.htm#oIpLm3a1joyc">Removing 7318 Software from Version 3.2</a></H2> <H2><a href="rmsw41.htm#A3LpLm340joyc">Removing 7318 Software from Version 4.1</a></H2> <H2><a href="rmsw42.htm#TjRBo89joyc">Removing 7318 Software from AIX Version 4.2 (or later)</a></H2> <H2><a href="cablepla.htm#DC6D055161trau">Cable Planning Chart: Example</a></H2> <H1><a href="config.htm#mn7ak246vick">Chapter 3. Serial Communications Network Server (7318) Configuration </a></H1> <H2><a href="defaultc.htm#C3E35EF775dee">Default Configuration File</a></H2> <H2><a href="tn3270kb.htm#nNYHm10joyc">TN3270 Keyboard Mapping</a></H2> <H2><a href="termcfg.htm#C3E3602484dee">termcfg Command</a></H2> <H2><a href="cns3270.htm#nANFj233dee">cns3270 File Format</a></H2> <H2><a href="adddynse.htm#A2C9586E335ldan">Adding Dynamic Sessions</a></H2> <H2><a href="addp10po.htm#CFBB489245dee">Adding a P10-Style Port on a S20</a></H2> <H2><a href="configst.htm#CFBB49E436dee">Configuring a Static Session</a></H2> <H2><a href="environ.htm#AD29p183ldan">7318 High-Availability Environment for the Model S20</a></H2> <H1><a href="termcomm.htm#A2C98289085ldan">Chapter 4. Terminal Command Session</a></H1> <H2><a href="commsess.htm#C3E3893213dee">7318 Command Session</a></H2> <H2><a href="rlogin.htm#C3E389F179dee">rlogin Command (Model S20)</a></H2> <H2><a href="telnet.htm#C3E38A3800dee">telnet Command (Model S20)</a></H2> <H2><a href="chgportt.htm#DA1C04F718trau">Changing Port TTY Parameters</a></H2> <H1><a href="usemodem.htm#A2C982E6089ldan">Chapter 5. Using Modems and Reverse Telnet</a></H1> <H2><a href="dialoutm.htm#sgn8jc9dee">Using Dial-Out Modems and Reverse Telnet</a></H2> <H2><a href="dialinmo.htm#l75Jmefjoyc"> Using Dial-In Modems</a></H2> <H2><a href="dialoutt.htm#A395Jm358joyc">Using Dial-Out to Configure a Dial-In Modem</a></H2> <H2><a href="consider.htm#H85Jm37joyc">Things to Consider when Configuring Modems</a></H2> <H1><a href="configpr.htm#fA5Jm1fejoyc">Chapter 6. Configuring Printers</a></H1> <H2><a href="configte.htm#CFD684F431dee">Configuring Terminal-Attached Printers</a></H2> <H2><a href="configre.htm#CFD684C869dee">Configuring Reverse Telnet Service for Printers</a></H2> <H2><a href="cnsconne.htm#A5D5Jm20cjoyc">cnsconnect for Printers</a></H2> <H1><a href="configsn.htm#C3E38FE728dee">Chapter 7. Configuring the Simple Network Management Protocol (SNMP) Feature</a></H1> <H1><a href="slipppp.htm#C3E3891017dee">Chapter 8. 7318 Serial Line Internet Protocol (SLIP) and Point-to-Point Protocol (PPP) </a></H1> <H1><a href="security.htm#C3E388F909dee">Chapter 9. 7318 Model S20 Security</a></H1> <H1><a href="configfi.htm#YI5Jm206joyc">Chapter 10. 7318 Configuration File Format </a></H1> <H2><a href="download.htm#C3E35F0015dee">Downloading the Files</a></H2> <H2><a href="configov.htm#C3E35F0959dee">Configuration File Overview</a></H2> <H1><a href="standalo.htm#A2C983B8865ldan">Chapter 11. 7318 Standalone Console Operation</a></H1> <H2><a href="7318bios.htm#C3E3983556ldang"> 7318 BIOS</a></H2> <H2><a href="logging.htm#C3E3999139dee">Logging During Load</a></H2> <H1><a href="probdet.htm#A2C983F2940ldan">Chapter 12. 7318 Problem Determination</a></H1> <H2><a href="toublesh.htm#A6hFDi12fdee">7318 Troubleshooting</a></H2> <H2><a href="biostrou.htm#D8A220E473trau">BIOS Console Troubleshooting Commands</a></H2> <H2><a href="diagnost.htm#C3E38CC613dee">7318 Diagnostics</a></H2> <H2><a href="configfj.htm#vZ39p3baldan">Configuration File Troubleshooting</a></H2> <H1><a href="ethernet.htm#A2C98440566ldan">Appendix A: Ethernet</a></H1> <H2><a href="etherneu.htm#b6TDnb4joyc">Ethernet Overview</a></H2> <H1><a href="wireseri.htm#uYTDn329joyc">Appendix B: Wiring Serial Devices</a></H1> <H1><a href="wireinte.htm#HaTDn2eejoyc">Appendix C: Wiring and Interconnection</a></H1> <H1><a href="datatran.htm#RbTDn15djoyc">Appendix D: Data Transmission</a></H1> <H1><a href="genspec.htm#ScTDn321joyc">Appendix E: General Specifications</a></H1> <H1><a href="connpino.htm#YdTDn208joyc">Appendix F: Connector Pinouts</a></H1> <H1><a href="bioscmds.htm#meTDn2b4joyc">Appendix G: BIOS Command Summary</a></H1> <H1><a href="hostcmds.htm#A2C984FE056ldan">Appendix H: Host Command and File Summary</a></H1> <H1><a href="featurec.htm#RhTDnb6joyc">Appendix I: 7318 Feature Codes and Part Number Information </a></H1> <H1><a href="updatebi.htm#fiTDn36fjoyc">Appendix J: Updating BIOS Code</a></H1> <H1><a href="syserr.htm#GmSDn25ajoyc">Appendix K: 7318 System Errors</a></H1> <H1><a href="buddyapi.htm#A1kTDn28cjoyc">Appendix L: Buddy Mode Application Program Interface (API)</a></H1> <H1><a href="glossary.htm#A1234ldang"> Glossary</a></H1> <H2><a href="a.htm#A3DCB7AB474janb">A</a></H2> <H2><a href="b.htm#A3DCB7AB497janb">B</a></H2> <H2><a href="c.htm#A3DCB7AB519janb">C</a></H2> <H2><a href="d.htm#A3DCB7AB541janb">D</a></H2> <H2><a href="e.htm#A3DCB7AB569janb">E</a></H2> <H2><a href="f.htm#A3DCB7AB588janb">F</a></H2> <H2><a href="g.htm#A3DCB7AB607janb">G</a></H2> <H2><a href="h.htm#A3DCB7AB625janb">H</a></H2> <H2><a href="i.htm#A3DCB7AB648janb">I</a></H2> <H2><a href="l.htm#A3DCB7AB673janb">L</a></H2> <H2><a href="m.htm#A3DCB7AB693janb">M</a></H2> <H2><a href="n.htm#A3DCB7AB715janb">N</a></H2> <H2><a href="o.htm#A3DCB7AB735janb">O</a></H2> <H2><a href="p.htm#A3DCB7AB753janb">P</a></H2> <H2><a href="r.htm#A3DCB7AB778janb">R</a></H2> <H2><a href="s.htm#A3DCB7AB808janb">S</a></H2> <H2><a href="t.htm#A3DCB7AB832janb">T</a></H2> <H2><a href="u.htm#A3DCB7AB856janb">U</a></H2>