[ Previous | Next | Contents | Home | Search ]
7318 Model S20 Guide and Reference

cnsconnect for Printers

The configuration and operation of the cnsconnect command for printers is essentially the same as for modems. For details on setting up and invoking the cnsconnect command, see "cnsconnect for Modems".

For printers, as well as for modems, the configuration file parameters are:

DeviceName     TargetHost     TcpPort     Flags
Note: For printers, you should set the bin flag if your printer uses more than 7-bit ASCII characters in its output stream.

[ Previous | Next | Contents | Home | Search ]