adfutil |
|
Provides the capability to merge Micro Channel information for PS/2 adapters with the AIX Version 3 Configuration Database. |
bterm |
|
Emulates terminals in bidirectional bus (BIDI) mode. |
cancel |
|
Cancels requests to a line printer. |
captoinfo |
|
Converts a termcap file to a terminfo descriptor file. |
cfgmgr |
|
Configures devices by running the programs specified in the Configuration Rules object class. |
chcons |
|
Redirects the system console to a specified device or file to be effective on the next start of the system. |
chdev |
|
Changes the characteristics of a device. |
chdisp |
|
Changes the display used by the
low function terminal (LFT) subsystem
. |
chfont |
|
Changes the default font for a display. |
chkbd |
|
Changes the default keyboard map used by the high function terminal Subsystem at system startup. |
clear |
|
Clears the terminal screen. |
devnm |
|
Names a device. |
diag |
|
Performs hardware problem determination. |
digest |
|
Converts the ASCII form of the /etc/qconfig file into the /etc/qconfig.bin file, a binary version of the queue configuration used by the qdaemon command. |
dscreen |
|
Starts the Dynamic Screen utility. |
enable |
|
Enables a printer queue |
fdformat |
|
Formats diskettes. |
flcopy |
|
Copies to and from diskettes. |
fold |
|
Folds long lines for finite-width output device. |
format |
|
Formats diskettes. |
getty |
|
Sets the characteristics of ports. |
hplj |
|
Post-processes the troff command output for the HP LaserJet Series printers. |
ibm3812 |
|
Post-processes the troff command output for the 3816 Pageprinter and the 3812 Model 2 Pageprinter. |
ibm3816 |
|
Post-processes the troff command output for the 3816 Pageprinter and the 3812 Model 2 Pageprinter. |
ibm5587G |
|
Post-processes troff command output for the 5587G printer with the (32x32/24x24) cartridge installed. |
iconv |
|
Converts the encoding of characters from one code page encoding scheme to another. |
infocmp |
|
Manages terminfo descriptions. |
iostat |
|
Reports Central Processing Unit (CPU) statistics and input/output statistics for tty, disks, and CD-ROMs. |
keycomp |
|
Compiles a keyboard mapping file into an input method keymap file. |
keymaps |
|
Displays INed command key layout for all keyboards. |
lp |
|
Sends requests to a line printer. |
lpr |
|
Enqueues print jobs. |
lpstat |
|
Displays line printer status information. |
lptest |
|
Generates the line printer ripple pattern. |
lsattr |
|
Displays attribute characteristics and possible values of attributes for devices in the system. |
lscfg |
|
Displays diagnostic information about a device. |
lsconn |
|
Displays the connections a given device, or kind of device, can accept. |
lscons |
|
Writes the name of the console device to standard output. |
lsdev |
|
Displays devices in the system and their characteristics. |
lsdisp |
|
Lists the displays currently available on the system. |
lsdsmitd |
|
Displays an alpha-ordered list of the domains for DSMIT. |
lsdsmitm |
|
Displays an alphabetically ordered list of machines in DSMIT. |
lsfont |
|
Lists the fonts available for use by the display. |
lskbd |
|
Lists the keyboard maps currently available to the Low Function Terminal (LFT) subsystem. |
lsparent |
|
Displays the possible parent devices that accept a specified connection type or device. |
mkdev |
|
Adds a device to the system. |
mkfont |
|
Adds the font code associated with a display to the system. |
mknod |
|
Creates a special file. |
mt (BSD) |
|
Gives subcommands to streaming tape device. |
panel20 |
|
Diagnoses activity between an HIA and the 5080 Control Unit. |
pdelay |
|
Enables or reports the availability of delayed login ports. |
pdisable |
|
Disables login ports. |
penable |
|
Enables or reports the availability of login ports. |
phold |
|
Disables or reports the availability of login ports on hold. |
pioattred |
|
Provides a way to format and edit attributes in a virtual printer. |
piobe |
|
Print job manager for the printer backend. |
pioburst |
|
Generates burst pages (header and trailer pages) for printer output. |
piocnvt |
|
Expands or contracts a predefined definition or virtual printer definition. |
piodigest |
|
Digests attribute values for a virtual printer definition into memory image and stores the memory image in a file. |
piofontin |
|
Copies fonts from a multilingual font diskette. |
pioformat |
|
Drives a printer formatter. |
piofquote |
|
Converts certain control characters destined for PostScript printers. |
pioout |
|
Printer backend's device driver interface program. |
piopredef |
|
Creates a predefined printer data stream definition. |
portmir |
|
Allows one TTY stream (monitor) to attach to another TTY stream (target) and monitor the user session that is taking place on that stream. |
pr |
|
Writes a file to standard output. |
pshare |
|
Enables or reports the availability of shared login ports. |
pstart |
|
Enables or reports the availability of login ports (normal, shared, and delayed). |
pstat |
|
Interprets the contents of the various system tables and writes it to standard output. |
reset |
|
Initializes terminals. |
rmdev |
|
Removes a device from the system. |
rmt |
|
Allows remote access to magnetic tape devices. |
script |
|
Makes a typescript of a terminal session. |
setmaps |
|
Sets terminal maps or code setmaps. |
splp |
|
Changes or displays printer driver settings. |
stty |
|
Sets, resets, and reports workstation operating parameters. |
stty-cxma |
|
Sends and reports the terminal options for 128-port asynchronous controllers. |
swapon |
|
Specifies additional devices for paging and swapping. |
swcons |
|
Redirects, temporarily, the system console output to a specified device or file. |
sysdumpdev |
|
Changes the primary or secondary dump device designation in a running system. |
tabs |
|
Sets tab stops on terminals. |
tapechk |
|
Performs consistency checking of the streaming tape device. |
tcopy |
|
Copies a magnetic tape. |
tctl |
|
Gives commands to a streaming tape device. |
termdef |
|
Queries terminal characteristics. |
tput |
|
Queries the terminal discriptor files in the terminfo database. |
tset |
|
Initializes terminals. |
tsm |
|
Provides terminal state management. |
tty |
|
Writes to standard output the full pathname of your terminal. |
automount |
|
Mounts NFS file systems automatically. |
chfs |
|
Changes attributes of a file system. |
chps |
|
Changes attributes of a paging space. |
chvfs |
|
Changes entries in the /etc/vfs file. |
crfs |
|
Adds a file system. |
crvfs |
|
Creates entries in the /etc/vfs file. |
defrags |
|
Increases a file system's contiguous free space. |
df |
|
Reports information about space on file systems. |
dfsck |
|
Checks file system consistency and interactively repairs the file system. |
dosformat |
|
Formats a DOS diskette. |
dumpfs |
|
Dumps file system information. |
ff |
|
Lists the file names and statistics for a file system. |
fsck |
|
Checks file system consistency and interactively repairs the file system. |
fsdb |
|
Debugs file systems. |
istat |
|
Examines i-node numbers. |
lsfs |
|
Displays the characteristics of file systems. |
mkfs |
|
Makes a file system. |
mklost+found |
|
Creates a lost and found directory for the fsck command. |
mkproto |
|
Constructs a prototype file system. |
mount |
|
Makes a file system available for use. |
ncheck |
|
Generates path names from i-node numbers. |
proto |
|
Constructs a prototype file for a file system. |
rmfs |
|
Removes a file system, any logical volume on which it resides, and the associated stanza in the /etc/filesystems file. |
rrestore |
|
Copies previously backed up file systems from a remote machine's device to the local machine. |
skulker |
|
Cleans up file systems by removing unwanted files. |
umount |
|
Unmounts a previously mounted file system, directory, or file. |
unmount |
|
Unmounts a previously mounted file system, directory, or file. |
update |
|
Periodically updates the super block. |
chlv |
|
Changes only the characteristics of a logical volume. |
chpv |
|
Changes the characteristics of a physical volume in a volume group. |
chvg |
|
Sets the characteristics of a volume group. |
cplv |
|
Copies the contents of a logical volume to a new logical volume. |
exportvg |
|
Exports the definition of a volume group from a set of physical volumes. |
extendlv |
|
Increases the size of a logical volume by adding unallocated physical partitions from within the volume group. |
extendvg |
|
Adds physical volumes to a volume group. |
importvg |
|
Imports a new volume group definition from a set of physical volumes. |
lslv |
|
Displays information about a logical volume. |
lspv |
|
Displays information about a physical volume within a volume group. |
lsvg |
|
Displays information about volume groups. |
migratepv |
|
Moves allocated physical partitions from one physical volume to one or more other physical volumes. |
mirrorvg |
|
Mirrors all the logical volumes that exist on a given volume group. |
mklv |
|
Creates a logical volume. |
mklvcopy |
|
Provides copies of data within the logical volume. |
mkvg |
|
Creates a volume group. |
mkvgdata |
|
Creates a file containing information about a volume group for use by the savevg and restvg commands. |
redefinevg |
|
Redefines the set of physical volumes of the given volume group in the device configuration database. |
reducevg |
|
Removes physical volumes from a volume group. |
reorgvg |
|
Reorganizes the physical partition allocation for a volume group. |
restvg |
|
Restores the user volume group and all it containers and files, as specified in the /tmp/vgdata/vgname/vgname.data file contained within the backup image created by the savevg command. |
rmlv |
|
Removes logical volumes from a volume group. |
rmlvcopy |
|
Removes copies from a logical volume. |
savevg |
|
Finds and backs up all file belonging to a specified volume group. |
synclvodm |
|
Synchronizes or rebuilds the logical volume control block, the device configuration database, and the volume group descriptor areas on the physical volumes. |
syncvg |
|
Synchronizes logical volume copies that are not current. |
unmirrorvg |
|
Removes the mirrors that exist on volume groups or specified disks. |
varyoffvg |
|
Deactivates a volume group. |
varyonvg |
|
Activates a volume group. |