[ Previous |
Next |
Contents |
Glossary |
Home |
Search ]
AIX Version 4.3 Commands Reference, Volume 4
pioformat Command
Purpose
Drives a printer formatter.
/usr/lpd/pio/etc/pioformat -@ DataBaseFile [ -! FormatterName ] [ -# + PassThroughOption ]
Description
The pioformat command initiates the printer formatter driver. The formatter driver establishes access to the database values, loads and links a printer formatter, and then drives the formatter by calling its setup function, initialize function, lineout function, passthru function, and restore function as appropriate. The formatter driver also provides the piogetvals subroutine, piogetopt subroutine, piocmdout subroutine, piogetstr subroutine, piomsgout subroutine, and pioexit subroutine used by the formatter.
The flags listed below are processed by the formatter driver and are not passed on to the formatter. However, all flags NOT listed below are assumed to be formatting flags and are passed on to the formatter.
Flags
-@ DataBaseFile |
Specifies either of the following:
- The full path name of the (digested) database file to be accessed
- The print queue and queue device names, separated by a colon
If the argument string begins with a / (slash) character, it is assumed to be a full path name.
The combination of the queue name and the queue device name results in a unique string that is a part of the database file name and is used to search for the database file name in the /var/spool/lpd/pio/@local/ddi directory. This short form alternative is provided as a convenience when the formatter driver and formatter are run as standalone devices, instead of by the spooler. |
-! FormatterName |
Specifies the full path name of the formatter to be loaded, linked, and driven.
If the -! flag is not specified, the default formatter name defined by the mf attribute name in the database is used. A default formatter name is provided as a convenience when the formatter driver and formatter are run as standalone devices, instead of by the spooler. |
-# + PassThroughOption |
|
Specifies that the print file should be passed through unmodified. If the -# + flag is not specified, the print file will be formatted.
The parameter that is passed to the formatter's setup routine contains a value of 1 instead of 0, indicating that the file should be passed through instead of being formatted. |
Examples
- To format the myfile
file according to the database file (virtual printer description) for the queue device named std
associated with the print queue named pro
, overriding the page width to 132 characters, and using the pioformat command and a formatter as a standalone filter, enter:
cat myfile | pioformat -@ pro:std -w 132 >/dev/lp0
- To use the pioformat command and a formatter in a pipeline running under the spooler, enter:
%Ide/pioformat -@ %Idd/%Imm -! %Idf/piof420x %Fbb %Fee ...
For this example, assume that:
- The printer is a 4207 Model 2 Proprinter.
- The print queue name is pro.
- There is only one queue device (virtual printer) defined for the print queue and its name is std
and its output data stream type is asc
(extended ASCII).
- The printer device name is /dev/lp0.
- The print job submitter specified the flag and argument -i 5
.
Before the print job manager (the piobe command) passes the pipeline to a shell to format the file, it resolves the pipeline's embedded references to attribute values. Based on the assumptions listed above for this example, the attribute references would be resolved as:
%Ide -> /usr/lpd/pio/etc
|
|
Directory where the pioformat command resides |
%Idd
->
/var/spool/lpd/pio/@local/ddi
|
|
Directory for database files |
%Imm
->
4207-2.asc.lp0.pro:std
|
|
Database file name |
%Idf -> /usr/lpd/pio/fmtrs
|
|
Directory for formatters |
%Fbb
-> |
Null string, since submitter did not specify the -b flag |
%Fee -> -i 5 |
Submitter specified this flag and argument. |
The resulting pipeline shown below would be passed to a shell to format the file (shown on multiple lines for readability):
/usr/lpd/pio/etc/pioformat # initiate the formatter driver
-@/usr/lpd/pio/ddi/4207-2.asc.lp0.pro:std
# (digested) database file
-!/usr/lpd/pio/fmtrs/piof420x # loadable formatter
-i5 # formatting option
# (indent 5 characters)
Files
/usr/lpd/pio/etc/pioformat |
Contains the formatter driver. |
/usr/lpd/pio/fmtrs/* |
Contains the formatters. |
/var/spool/lpd/pio/@local/ddi/* |
Contains the digested database files. |
Related Information
The piobe command, pioburst command, piodigest command, piofquote command, pioout command, piopredef command.
The piocmdout subroutine piogetvals subroutine, piogetopt subroutine, piogetstr subroutine, piomsgout subroutine, pioexit subroutine.
Printer Overview for System Management
in the AIX Version 4.3 Guide to Printers and Printing.
Virtual Printer Definitions and Attributes
in the AIX Version 4.3 Guide to Printers and Printing.
Printer Addition Management Subsystem: Programming Overview in AIX Kernel Extensions and Device Support Programming Concepts.
Printer Code Page Translation Tables
in the AIX Version 4.3 Guide to Printers and Printing.
Printer Colon File Conventions
in the AIX Version 4.3 Guide to Printers and Printing.
Printer Colon File Escape Sequences
in the AIX Version 4.3 Guide to Printers and Printing.
Printer Specific Information
in the AIX Version 4.3 Guide to Printers and Printing.
Printer Support
in the AIX Version 4.3 Guide to Printers and Printing.
Printer Backend Overview for Programming
in the AIX Version 4.3 Guide to Printers and Printing.
Adding a Printer Using the Printer Colon File
in the AIX Version 4.3 Guide to Printers and Printing.
[ Previous |
Next |
Contents |
Glossary |
Home |
Search ]