Operation Toolbar

	Corner See Creating Corners (Both Elements Trimmed)
	Clicking this icon displays additional icons in the Sketch Tools toolbar. For information, see Extended Toolbar (Extended Toolbar 1).
	See Creating Chamfers with Both Elements Trimmed
	Clicking this icon displays additional icons in the Sketch Tools toolbar. For information, see Extended Toolbar (Extended Toolbar 2).
	See Relimitations Sub-toolbar below
	Clicking this icon displays additional icons in the Sketch Tools toolbar. For information, see Extended Toolbar (Extended Toolbar 3).
	See Transformation Sub-toolbar below
	See 3D Geometry Sub-toolbar below

Relimitations Sub-toolbar

	Trim See Trimming Elements Clicking this icon displays additional icons in the Sketch Tools toolbar. For information, see Extended Toolbar (Extended Toolbar 3).
	Break See Breaking Elements
	Quick Trim See Breaking and Trimming
	Close See Closing Elements
	Complement See Complementing an Arc

Transformation Sub-toolbar

	Mirror See Creating Mirrored Elements
	Symmetry See Moving Elements by Symmetry
	Translate See Translating Elements
	Rotate See Rotating Elements
	Scale See Scaling Elements
	Offset See Offsetting Elements Clicking this icon displays additional icons in the Sketch Tools toolbar. For information, see Sketch Tools Toolbar (Extended Toolbar 5).

3D Geometry Sub-toolbar

	Project 3D Elements See Projecting 3D Elements onto the Sketch Plane
	Intersect 3D Elements See Intersecting 3D Elements with the Sketch Plane
	Project 3D Silhouette Edges See Projecting 3D Silhouette Edges

Extended Toolbars

The Sketch Tools toolbar displays additional icons if you select a certain number of capabilities available from the Operation Toolbar.

Extended Toolbar 1

	Trim All Elements See Creating Corners
	Trim First Element See Creating Corners (One Element Trimmed)
	No Trim See Creating Corners (No Element Trimmed)
	Standard Lines Trim See Creating Corners (Standard Lines Trim)
	Construction Lines Trim See Creating Corners (Construction Lines Trim)
	Construction Lines No Trim See Creating Corners (Construction Lines Not Trimmed)

Extended Toolbar 2

	Trim All Elements See Creating Chamfers with Both Elements Trimmed
	Trim First Element See Creating chamfers with One Element Trimmed
	No Trim See Creating Chamfers with No Element Trimmed
	Standard Lines Trim See Creating Chamfer with Standard Lines Trimmed
	Construction Lines Trim See Creating Chamfer with Construction Lines Trimmed
	Construction Lines No Trim See Creating Chamfers (Construction Lines Not trimmed)

Extended Toolbar 3

	Trim All Elements See Trimming Elements and Trimming Multiple Elements
	Trim First Element See Trimming One Element

Extended Toolbar 4

	Break and Rubber In See Breaking and Trimming
	Break and Rubber Out See Breaking and Trimming
	Break and Keep See Breaking and Trimming

Extended Toolbar 5

	No Propagation See Offsetting Elements
	Tangent Propagation See Offsetting Elements
	Point Propagation See Offsetting Elements
	Both Side Offset See Offsetting Elements