Edit a List of Elements: Click the icon to display the Element list dialog box. Remove any element clicking the Remove button or Replace any element using the Replace button. | |
Defining Current Objects: right-click and select Define in Work Object... | |
Scan the Part and Define Local Objects: Select Edit > Scan or Define in Work Object..., click the buttons to move from one local feature to the other, then the Exit button. | |
Define in Work Object | Defining a feature as local without scanning the whole part is possible using the Define in Work Object contextual command. |
Perform a Draft Analysis: Define a direction using the compass, click this icon, select the part, and enter the minimum draft angle value in the field below the green frame. | |
Perform a Surface Curvature Analysis: Select a body, click this icon and enter new values in the color range. | |
Analyze Thread/Tap: Click this icon and check or uncheck display options. | |
Create Datums: Click this icon to deactivate the History mode. | |
Isolate Geometric Elements: Select the element to be isolated and right-click XXXobject > Isolate. | |
Apply a Material: Select the element on which the material should be applied, click this icon, select any material and click Apply Material. | |
Extract Geometry: the capability is proposed when an update operation detects difficulties in building the part. | |
Display Parents and Children: Select the feature under study, Tools > Parent/Children... and use the diverse contextual commands to display parents and children. | |
Define an Axis System: Click this icon, enter coordinates or select geometry to define the three axes. | |
Publish Elements: Select Tools > Publication, select the element to be published then rename it. | |
|
Work on 3D Support: click the icon and select a define the 3D support type: Reference or Local. |
|
Managing the Background Visualization: select one of the visualization modes and select a plane. |