[ Bottom of Page | Previous Page | Contents | Index | Library Home | Legal | Search ]

Technical Reference: Communications, Volume 2

Index

Special characters
Numerics
A B C D E F G H I K L M N O P Q R S T U V W X

Special characters

/etc/hosts file
- closing (1), (2)
- opening (1), (2)
- retrieving host entries (1), (2), (3), (4), (5), (6)
- setting file markers (1), (2)
/etc/networks file
- closing (1), (2), (3)
- opening (1), (2)
- retrieving network entries (1), (2), (3), (4), (5), (6)
- setting file markers (1), (2)
/etc/protocols file
- closing (1), (2)
- opening (1), (2)
- retrieving protocol entries (1), (2), (3), (4), (5), (6)
- setting file markers (1), (2)
/etc/resolv.conf file
- retrieving host entries (1), (2), (3), (4)
- searching for domain names
- searching for Internet addresses
/etc/services file
- closing (1), (2)
- opening (1), (2), (3), (4)
- reading (1), (2)
- retrieving service entries (1), (2), (3), (4)
- setting file markers (1), (2)
_getlong subroutine
_getshort subroutine
_ll_log subroutine
_putlong subroutine
_putshort subroutine

Numerics

400ap106619 (1), (2)

A

accept subroutine
adjmsg utility
administrative operations
- providing interface for
allocb utility (1), (2)
ASCII strings
- converting to Internet addresses
asynchronous mode
- sending data

B

backq utility
bcanput utility
bind subroutine
bufcall utility (1), (2)
byte streams
- placing long byte quantities
- placing short byte quantities

C

canput utility
clients
- server authentication
clone device driver
code, terminating section
communications kernel service subroutines
- res_ninit
compressed domain names
- expanding
connect subroutine
connected sockets
- creating pairs
- receiving messages
- sending messages (1), (2)
connection requests
connectionless mode
converter subroutines
copyb utility
copymsg utility
current domain names
- returning
- setting
current host identifiers
- retrieving

D

data
- receiving normal or expedited
- sending over connection
data blocks
- allocating
data link provider, providing interface
datamsg utility
default domains
- searching names
disconnects
- identifying cause and retrieving data
- user-initiated requests
dlpi STREAMS driver
dn_comp subroutine
dn_expand subroutine
domain names
- compressing
drivers
- installing
- setting processor levels
dupb utility
dupmsg utility

E F

G

H

host machines
- setting names
- setting unique identifiers
htonl subroutine
htons subroutine

I

K

kvalid_user subroutine
- DCE principal mapping

L

library structures
- allocating
- freeing
linkb utility
listen subroutine
ll_dbinit subroutine
ll_hdinit subroutine
ll_log subroutine
local host names
- retrieving
long byte quantities
- retrieving
long integers, converting

M

Management Information Base (MIB)
- registering a section
mapping
- Ethernet number
memory management subroutines
mi_bufcall Utility
mi_close_comm Utility
mi_next_ptr Utility
mi_open_comm Utility
MIB variables
- encoding values from
- setting variable values
minor devices, opening on another driver
modules
msgdsize utility
multiplexed streams
- connecting (1), (2)
- disconnecting (1), (2)

N

name servers
name2inst subroutine
names
- binding to sockets
network addresses
network entries
- retrieving (1), (2)
- retrieving by address (1), (2)
- retrieving by name (1), (2)
network host entries
- retrieving (1), (2)
- retrieving by address (1), (2)
- retrieving by name (1), (2)
network host files
- opening (1), (2)
network services library
- supporting transport interface functions
next2inst subroutine
nextot2inst subroutine
noenable utility (1), (2)
ntohl subroutine
ntohs subroutine

O P

peer entries
peer socket names
- retrieving
pfmod Packet Filter Module
- upstream data messages, removing
prim2oid
priority bands
- checking write status
- flushing messages
processor levels, setting
protocol data unit (PDU)
- sending
- sending an open
protocol entries
- retrieving (1), (2)
- retrieving by name (1), (2)
- retrieving by number (1), (2)
psap.h file
pullupmsg utility
putbq utility
putctl utility
putctl1 utility
putmsg system call
putnext utility
putpmsg system call
putq utility

Q

R S

s_generic subroutine
sad device driver
send_file
- send the contents of file through a socket
send_file subroutine
- socket options
send subroutine
sendmsg subroutine
sendto subroutine
server query mechanisms
- providing interfaces to
service entries
- retrieving by name (1), (2)
- retrieving by port (1), (2)
service file entries
- retrieving (1), (2)
set_auth_method subroutine
- authentication methods
  - list of
setdomainname subroutine
sethostent_r subroutine
sethostent subroutine
sethostid subroutine
sethostname subroutine
setnetent_r subroutine
setnetent subroutine
setnetgrent_r subroutine
setnetgrent subroutine
setprotoent_r subroutine
setprotoent subroutine
setservent_r subroutine
setservent subroutine
setsockopt subroutine
short byte quantities
- retrieving
short integers, converting
- from host byte order
- from network byte order
- to host byte order
- to network byte order
shutdown subroutine
SIGPOLL signal
- informing stream head to issue
- returning events of calling process
SMUX
- communicating with the SNMP agent
- communicating with the snmpd daemon
- ending SNMP communications
- initiating transmission control protocol (TCP)
- peer responsibility level
- reading a MIB variable structure into
- reading the smux_errno variable
- registering an MIB tree for
- retreiving peer entries
- sending an open PDU
- sending traps to SNMP
- setting debug level for subroutines
- unregistered trees
- waiting for a message
smux_close subroutine
smux_error subroutine
smux_free_tree subroutine
smux.h file
smux_init subroutine
smux_register subroutine
smux_response subroutine
smux_simple_open subroutine
smux_trap subroutine
smux_wait subroutine
SNMP multiplexing peers
snmpd daemon
- incoming messages alert
snmpd.peers file
socket connections
- accepting
- listening
socket names
- retrieving
socket options
- setting
socket receive operations
- disabling
socket send operations
- disabling
socket subroutine
socket subroutines
- freeaddrinfo subroutine
- if_indextoname subroutine
- if_nameindex subroutine
- if_nametoindex subroutine
socketpair subroutine
sockets
- connecting
- creating
- initiating TCP for SMUX peers
- managing
- retrieving with privileged addresses
sockets-based protocols, providing access
sockets kernel service subroutines
- accept
- bind
- connect
- dn_comp
- getdomainname
- gethostid
- gethostname
- getpeername
- getsockname
- getsockopt
- listen
- recv
- recvfrom
- recvmsg
- send
- sendmsg
- sendto
- setdomainname
- sethostid
- sethostname
- setsockopt
- shutdown
- socket
- socketpair
sockets messages
- receiving from connected sockets
- receiving from sockets (1), (2)
- sending through any socket
sockets network library subroutines
- _getlong
- _getshort
- _putlong
- _putshort
- dn_expand
- endhostent
- endhostent_r
- endnetent
- endnetent_r
- endnetgrent_r
- endprotoent
- endprotoent_r
- endservent
- endservent_r
- gethostbyaddr
- gethostbyaddr_r
- gethostbyname
- gethostbyname_r
- gethostent
- gethostent_r
- getnetbyaddr
- getnetbyaddr_r
- getnetbyname
- getnetbyname_r
- getnetent
- getnetent_r
- getprotobyname
- getprotobyname_r
- getprotobynumber
- getprotobynumber_r
- getprotoent
- getprotoent_r
- getservbyname
- getservbyname_r
- getservbyport
- getservbyport_r
- getservent
- getservent_r
- htonl
- htons
- inet_addr
- inet_Inaof
- inet_makeaddr
- inet_netof
- inet_network
- inet_ntoa
- ntohl
- ntohs
- rcmd
- res_init
- res_mkquery
- res_query
- res_search
- res_send
- rexec
- rresvport
- ruserok
- sethostent
- sethostent_r
- setnetent
- setnetent_r
- setprotoent
- setprotoent_r
- setservent
- setservent_r
splice subroutine
splstr utility
splx utility
sprintoid subroutine
srv utility
- messages queued
str_install utility
str2oid subroutine
stream heads
- checking queue for message
- counting data bytes in first message
- issuing SIGPOLL signal
- removing modules
- retrieving messages
- retrieving module names
- returning set delay time
- setting delay
streamio operations
- I_ATMARK
- I_CANPUT
- I_CKBAND
- I_FDINSERT
- I_FIND
- I_FLUSH
- I_FLUSHBAND
- I_GETBAND
- I_GETCLTIME
- I_GETSIG
- I_GRDOPT
- I_LINK
- I_LIST
- I_LOOK
- I_NREAD
- I_PEEK
- I_PLINK
- I_POP
- I_PUNLINK
- I_PUSH
- I_RECVFD
- I_SENDFD
- I_SETCLTIME
- I_SETSIG
- I_SRDOPT
- I_STR
- I_UNLINK
STREAMS
- mi_bufcall Utility
- mi_close_comm Utility
- mi_next_ptr Utility
- mi_open_comm Utility
- performing control functions
- unweldq Utility
- weldq Utility
STREAMS buffers
- checking availability
STREAMS device drivers
- clone
- sad
STREAMS drivers
- dlpi
- xtiso
STREAMS message blocks
- copying (1), (2)
- duplicating descriptors
- freeing (1), (2)
- removing from head of message
- removing from messages
STREAMS messages
- allocating
- allocating data blocks
- checking buffer availability
- checking markings
- concatenating
- concatenating and aligning data bytes
- constructing internal ioctl
- converting streamio operations
- counting data bytes
- creating, adding information, and sending downstream
- creating control (1), (2)
- determining whether data message
- duplicating
- flushing in given priority band
- generating error-logging and event-tracing
- getting next from queue
- getting next priority
- getting off stream
- passing to next queue
- placing in queue
- putting on queue
- removing from queue
- retrieving file descriptors
- retrieving without removing
- returning number of data bytes
- returning number on queue
- returning priority band of first on queue
- returning to beginning of queue
- sending
- sending in reverse direction
- sending priority
- sending to stream head at other end of stream pipe
- trimming bytes
STREAMS modules
- timod
- tirdwr
STREAMS queues
- checking for messages
- counting data bytes in first message
- enabling
- flushing
- flushing input or output
- getting next message
- obtaining information
- passing message to next
- preventing scheduling
- putting messages on
- retrieving pointer to write queue
- returning message to beginning
- returning number of messages
- returning pointer to mate
- returning pointer to preceding
- returning pointer to read queue
- returning priority band of first message
- scheduling for service
- testing for space
STREAMS subroutines
- isastream
- t_accept
- t_alloc
- t_bind
- t_close
- t_connect
- t_error
- t_free
- t_getinfo
- t_getstate
- t_listen
- t_look
- t_open
- t_optmgmt
- t_rcv
- t_rcvconnect
- t_rcvdis
- t_rcvrel
- t_rcvudata
- t_rcvuderr
- t_snd
- t_snddis
- t_sndrel
- t_sndudata
- t_sync
- t_unbind
STREAMS system calls
- getmsg
- getpmsg
- putmsg
- putpmsg
STREAMS utilities
- adjmsg
- allcob
- backq
- bcanput
- bufcall
- canput
- copyb
- copymsg
- datamsg
- dupb
- dupmsg
- enableok
- esballoc
- flushband
- flushq
- freeb
- freemsg
- getadmin
- getmid
- getq
- insq
- linkb
- msgdsize
- noenable
- OTHERQ
- pullupmsg
- putbq
- putctl
- putctl1
- putnext
- putq
- qenable
- qreply
- qsize
- RD
- rmvb
- rmvq
- splstr
- splx
- str_install
- strlog
- strqget
- testb
- timeout
- unbufcall
- unlinkb
- untimeout
- WR
string conversions
strlog utility
strqget utility
synchronous mode
- sending data

T

U

unbufcall utility
unconnected sockets
- receiving messages
- sending messages (1), (2)
unique identifiers
- retrieving
unlinkb utility
untimeout utility
unweldq Utility

V

W

X

xtiso STREAMS driver

[ Top of Page | Previous Page | Contents | Index | Library Home | Legal | Search ]