Mold Tooling Design Creation Tool Bars

This section describes the various icons available in the Mold Tooling Design workbench.

The toolbars

• Mold Base Components

• Guiding Components

• Locating Components

• Fixing Components

• Ejection Components

• Injection Components

• Miscellaneous Components

• Move

are located on the right in the default set-up

Mold Base Components Toolbar

	Create a new mold See Creating a Standard Mold Base
	Add Mold Plate See Adding a Plate
	Add Slider See Mold Plate Sub-toolbar below

Mold Plate Sub-toolbar

	Add Slider See Standard Mold Components and Positioning a Slider
	Add Retainers See Standard Mold Components
	Add Insert See Adding an Insert

Guiding Components Toolbar

See Mold Guiding Sub-toolbar below

Mold Guiding Sub-toolbar

	Add LeaderPin See Standard Mold Components
	Add Bushing See Standard Mold Components

Locating Components Toolbar

See Mold Locating Sub-toolbar below

Mold Locating Components Sub-toolbar

	Add Sleeve See Standard Mold Components
	Add Locating Ring See Standard Mold Components
	Add Dowel Pin See Standard Mold Components

Fixing Components Toolbar

See Mold Screws Sub-toolbar below

Mold Screws Sub-toolbar

	Add CapScrew See Standard Mold Components
	Add CountersunkScrew See Standard Mold Components
	Add LockingScrew See Standard Mold Components

Ejection Components Toolbar

See Mold Ejector Sub-toolbar below

Mold Ejector Sub-toolbar

	Add EjectorPin See Standard Mold Components
	Add Ejector See Standard Mold Components
	Add FlatEjector See Standard Mold Components
	Add EjectorSleeve See Standard Mold Components
	Add CorePin See Standard Mold Components
	Add StopPin See Standard Mold Components
	Add AnglePin See Standard Mold Components
	Add KnockOut See Standard Mold Components

Injection Components Toolbar

	See Mold Injector Sub-toolbar below
	Add Gate See Creating Gates
	Add Runner See Creating Runners
	Add Coolant Channel See Coolant Channel

Mold Injector Sub-toolbar

	Add SprueBushing See Standard Mold Components
	Add SpruePuller See Standard Mold Components
	Add Support Pillar See Standard Mold Components
	Add O-Ring See Standard Mold Components
	Add Plug See Standard Mold Components
	Add Baffle See Standard Mold Components

Miscellaneous Components Toolbar

See Mold Other Sub-toolbar below

Mold Other Sub-toolbar

	Add User Component See Standard Mold Components
	Add EyeBolt See Standard Mold Components
	Add Spring See Standard Mold Components

Move toolbar

	Manipulation See Manipulate Components
	Snap See Snap Components