Adjusting the Cable Length of From and To Equipment

	This task explains how to adjust the cable length of From and To Equipment on cables with a status of `Fully` `Routed` or `Complete Route.`
	Use the `Electrical Cable Database Cable Selection` dialog box to load cable data from the database, and to route cables. You can determine the cables that are routed through a specific light network object by using the the `Select Cables Routed Through a Network Object` button . See Querying Cables Routed Through a Specific Network Object for more information.
	1.	You can add adjust the cable length of From and To Equipment on a fully routed cable, or on a cable with a status of `Complete Route`. (`Complete Route` indicates the cable had been `Partially Routed`. See Changing the Status of a Partial Route.) From the list in the `Electrical Cable Database Cable Selection` dialog box, select one or more cables where extra length needs to be added to the From Equipment. Sort on the `From Equipment` column to make sure you select cables that are connected to the same equipment. Click the `Adjust Extra Length to From Equipment` button and the `Extra Length` field displays at the bottom of the dialog box. Also, the `From` `Extra Length` column is added to the dialog box. Enter the extra length and click `Finish`. The `Electrical Cable Database Cable Result` dialog box displays. You can click `Save As`to save the report. NOTE: By default, the distance between the equipment connector and the connected light network object is added to the cable length. Choosing this command overrides this distance, and adds the desired extra length. Click `Previous` to return to the `Electrical Cable Database Cable Selection` dialog box. The `From` `Extra Length` column displays the extra length for the selected cable routes. Click the `Adjust Extra Length to To Equipment` button , and enter extra length to the To Equipment in the `Extra Length` field. Click `Finish` and the `Electrical Cable Database Cable Result` dialog box displays. You can click `Save As` to save the report. Click `Previous` to return to the `Electrical Cable Database Cable Selection` dialog box. The `To` `Extra Length` column displays the extra length for the selected routes.
	Whenever you click `Previous` and return to the `Electrical Cable Database Cable Selection` dialog box, you can continue working with the cables listed in the dialog box. You can: Load cable data from the database. See Loading Cable Data from the ENOVIA Database. Route or partially route cables. See Routing Cables from the Database. Change the status of a partially routed cable to `Complete Route`. See Changing the Status of a Partial Route. Display light network object labels and main key stations on a route. See Displaying Light Network Object Labels. Analyze data from a cable route and from a light network object. See Analyzing Cable Routes and Light Network Objects. Recommend a specific path when routing or partially routing a cable. See Recommending a Specific Path. Forbid certain light network objects from being used when routing or partially routing a cable. See Forbidding a Specific Path. Query and list cables routed through a specific light network object. See Querying Cables Routed Through a Specific Network Object. Validate a cable route. See Validating a Cable Route. Delete a cable route or part of a cable route. Deleting a Cable Route or Parts of a Route. Set routing rules and enable various routing options. See Setting Routing Rules. Lock or unlock cable routes. See Locking and Unlocking Cable Routes.