 |
The Digital Mock-up 2D workshop enables you
to:
- insert 2D documents
- manipulate 2D documents (translate, zoom, rotate)
- create annotated views
- manage annotated views
- export and import annotated views
- compare 2D documents of the following type:
- cgm format (CATIA, ENOVIA-DMU Navigator)
- CATDrawing format (ENOVIA-DMU Navigator only)
- V4 model (ENOVIA-DMU Navigator only)
- dxf/dwg format (ENOVIA-DMU Navigator only)
- measure distance, angle and radius on 2D documents
- save and print image captures
|
 |
Some functionalities will not be available
depending upon the type of document you open in the 2D Workshop.
- The insert, manipulate and annotated views functionalities
are not available when the document opened in the 2D Workshop is of the
following document types:
- raster (bmp, tiff, jpeg, etc.)
- cdd
- model
- CATDrawing
- It is recommended that you not use the Open in New Window
command in the DMU 2D Viewer.
|
 |
The Print command will by default print the
viewer content.
- In Display mode, the viewer content is printed as is.
- In Whole document mode, the viewer content is printed as
if the entire document were visible in the viewer (equivalent to the
Fit All In command).
|
|
|
The tiff multi-page format is not supported. |
|
Entering the 2D
Workshop: In the menu bar, select File
->Open , select a document and click
Open button. |
 |
Inserting 2D
Documents: Click the icon. In the File Selection dialog box, select a
file and click the Open button. |
|
Manipulating 2D
Documents: Click the document (the manipulators appear). To translate,
press Left Mouse Button and drag. To zoom, click one of the corner
manipulators (little squares) and drag. To rotate, click one of the arrow
manipulators and drag. |
 |
Creating an
Annotated View: Click the icon. Using the DMU 2D Marker toolbar, create
your annotations (lines, circles, rectangles, text, etc.). Click the Exit
icon. |
 |
Managing Annotated
Views: Click the icon. In the Annotated Views dialog box, double-click
the View you wish to re-invoke. |
 |
Exporting and
Importing 2D Annotations: Click icon. Define file name to export or
import. Click save button. |
|
Comparing Drawings:
Open a drawing and click the Compare Drawing icon. Select the drawing you
want to compare with the reference, the second drawing is opened and
compared with the first one. |
 |
Measuring Distance, Angle and Radius on 2D Documents: Click the 2D
Measure icon, calibrate, then make your measure. |
|
Publishing 2D
Documents: Click the icon. Identify the path where you want to save the
report as well as the report name then click
Save. |
|
Saving and Printing
Image Captures In the menu bar, select
Tools -> Image -> Capture. |
|
Saving a 2D Document
In the menu bar, select File -> Save As. Click the selection button,
select a file type and click OK to validate. |