Auxiliary Operations Toolbar

This toolbar contains commands for creating auxiliary operations in the program.

	See Tool Change Sub-toolbar below
	Machine Rotation See Inserting Machine Rotations
	Machine Instruction, available if NC Machine Tool Simulation is installed. Manages machine axes motion and/or lock machine axes in the machining program. External/Peripheral axis position and/or lock. Lock parallel axis. Example: NC Machine with W axis. Capability to influence machine simulation by positioning rotary axes at user defined positions. Control over machine configuration. Example: NC machine with 2 head positions. Integration with Automatic Transition Path generation. See NC Machine Tool Simulation User's Guide for more information.
	Machining Axis Change See Inserting a Machining Axis Change
	Post-Processor Instruction See Inserting Post-Processor Instructions
	See Transformation Management Sub-toolbar below.

Tool Change Sub-toolbar

The following toolbar is accessed from the drop-down icon in the Auxiliary Operations toolbar.

It contains icons for creating and editing tool changes. Please note that the icon representing a Tool Change operation in the tree looks like this: .

	See Drill tool for more information about this resource
	See Tap tool for more information about this resource
	See Thread Mill tool for more information about this resource
	See Countersink tool for more information about this resource
	See Reamer tool for more information about this resource
	See Spot Drill tool for more information about this resource
	See Center Drill tool for more information about this resource
	See Multi-Diameter Drill tool for more information about this resource
	See Boring and Chamfering tool for more information about this resource
	See Two-Sides Chamfering tool for more information about this resource
	See Boring Bar tool for more information about this resource
	See Counterbore Mill tool for more information about this resource
	See End Mill tool for more information about this resource
	See Face Mill tool for more information about this resource
	See Conical Mill tool for more information about this resource
	See T-Slotter tool for more information about this resource.

Transformation Management Sub-toolbar

	Copy Operator See Inserting a COPY Operator
	TRACUT Operator See Inserting a TRACUT Operator
	Copy Transformation Instruction See Inserting a Copy-Transformation Instruction
	Copy Program See Identical Parts Machining
	Merge Program See Identical Parts Machining
	Opposite Hand Machining Options See Opposite Hand Machining
	Reverse Machining Conditions See Opposite Hand Machining
	Reorder Operations List See Opposite Hand Machining
	Inverse Macros See Opposite Hand Machining.