Dress-Up Elements

The Interactive Drafting workbench provides a simple method to create the following view dress-up elements on existing 2D elements.

 

Create center lines (no reference): Apply a center line to one or more circles.
Create center lines (reference): Apply a center line to one or more circles with respect to a reference (linear or circular).

Modify center lines or axis lines: Modify one or more center lines at one or more ends of this/these center lines.
Create threads (no reference): Create a thread without a reference.
Create threads (reference): Create a thread with a reference, either circular (circle or point) or linear (line).
Create axis lines: Create an axis line by selecting lines.
Create axis lines and center lines: Create an axis line by selecting lines.
Create an area fill: Create an area fill, i.e. a closed area on which you will then apply graphical dress-up elements called patterns (these can be hatching, dotting or coloring). Patterns can be applied to area fills created from both sketched and generated elements.
Modify an area fill: Modify the shape of the area fill, or delete/create a support geometry for this area fill.
Automatic Detection: Detect automatically the area to be filled
Profile Selection: Select in the geometry the elements which will be the area fill borders.
Create Datum: Define if the area fill is an isolated one or not.
Create arrows: Create an arrow.