[ Home | Search ]

Commands List: N

Select the command you want to read about. You may also go back to the Commands List.

named
Provides the server function for the Domain Name Protocol.
namerslv
Directly manipulates domain name server entries for local resolver routines in the system configuration database.
ncheck
Generates path names from i-node numbers.
ndp
IPv6 neighbor discovery display and control.
ndpd-host
ndp daemon for hosts.
ndx
Creates a subject-page index for a document.
neqn
Formats mathematical text for the nroff command.
netlsd
Starts the license server.
netpmon
Monitors activity and reports statistics on network I/O and network-related CPU usage.
netstat
Shows network status.
newaliases
Builds a new copy of the alias database from the /etc/aliases file.
newfile
Converts a text file into an INed structured file.
newform
Changes the format of a text file.
newgrp
Changes your primary group identification.
newkey
Creates a new key in a /etc/publickey file.
news
Writes system news items to standard output.
next
Shows the next message.
nfsd
Starts client requests for file system operations.
nfso
Configures Network File System (NFS) network options.
nfsstat
Displays statistical information about the Network File System (NFS) and Remote Procedure Call (RPC) calls.
nice
Runs a command at a lower or higher priority.
nim
Performs operations on Network Install Manager (NIM) objects.
nimclient
Allows Network Installation Manager (NIM) operations to be performed from a NIM client.
nimconfig
Initializes the Network Install Manager (NIM) client package.
nimdef
Defines Network Installation Manager (NIM) clients from a stanza file. This command applies to AIX Version 4.2 or later.
niminit
Configures the Network Installation Management (NIM) client package.
nl
Numbers lines in a file.
nm
Displays the symbol table of an object file.
no
Configures network options.
nohup
Runs a command without hangups.
nrglbd
Manages the Global Location Broker database.
nroff
Formats text for printing on typewriter-like devices and line printers.
nslookup
Queries Internet domain name servers.
nsupdate
Updates a DNS server.
ntpdate
Sets the date and time using the Network Time Protocol (NTP). This command applies to AIX Version 4.2 or later.
ntpq
Starts the standard Network Time Protocol (NTP) query program. This command applies to AIX Version 4.2 or later.
ntptrace
Traces a chain of Network Time Protocol (NTP) hosts back to their master time source. This command applies to AIX Version 4.2 or later.
ntsc
Enables or disables NTSC (National Television Standards Committee) video output of IBM ThinkPad Power Series 850 which has G10 Graphics with Motion Video Adapter.
ntx_arp
Displays and modifies the Network Terminal Accelerator (NTX) adapter's Internet-to-Ethernet address translation table.
ntx_chaddr
Displays the configurations of or configures individual Network Terminal Accelerator (NTX) channels.
ntx_chinfo
Displays Network Terminal Accelerator (NTX) channel information. This command applies to AIX Version 4.2 or later.
ntx_chreset
Resets a Network Terminal Accelerator (NTX) channel. This command applies to AIX Version 4.2 or later.
ntx_comun
Displays and configures a Simple Network Management Protocol (SNMP) community profile for a Network Terminal Accelerator (NTX).
ntx_dlli
Accesses the Diagnostic Link Layer Interface (DLLI) for the Network Terminal Accelerator (NTX).
ntx_dloop
Performs a direct memory access (DMA) loopback test for the Network Terminal Accelerator (NTX).
ntx_ifcfg
Displays or assigns the Network Terminal Accelerator (NTX) network interface address.
ntx_load
Downloads code to a Network Terminal Acclerator (NTX) host adapter board.
ntx_log
Displays Network Terminal Accelerator (NTX) log information.
ntx_macaddr
Configures the Network Terminal Accelerator (NTX) MAC-layer addresses.
ntx_nms
Displays and configures network management station (NMS) authentication for the Network Terminal Accelerator (NTX) Simple Network Management Protocol (SNMP) agent.
ntx_nstat
Displays network information for the Network Terminal Accelerator (NTX).
ntx_ping
Sends an echo request to a network host from the Network Terminal Accelerator (NTX).
ntx_pserv
Displays and assigns services to protocol ports for the Network Terminal Accelerator (NTX).
ntx_reset
Resets the Network Terminal Accelerator (NTX) adapter. This command applies to AIX Version 4.2 or later.
ntx_route
Manipulates the Network Terminal Accelerator (NTX) routing tables.
ntx_snmp
Sets and displays the state of the Network Terminal Accelerator (NTX) Simple Network Management Protocol (SNMP) agent.
ntx_stat
Displays and clears Network Terminal Accelerator (NTX) diagnostic information.
ntx_traps
Displays or configures the Network Terminal Accelerator (NTX) Simple Network Management Protocol (SNMP) traps.
ntx_ttype
Adds to, displays, or clears the terminal type database for the Network Terminal Accelerator (NTX).
ntx_ver
Displays Network Terminal Accelerator (NTX) version information.
ntx_wdog
Starts the watchdog timer on a Network Terminal Accelerator (NTX) adapter board. This command applies to AIX Version 4.2 or later.
nulladm
Creates active accounting data files.
number
Displays the written form of a number.

Go back to the Commands List.