Before you start your first session, you can customize the way you work to suit your habits. This type of customization is stored in permanent setting files: these settings will not be lost if you end your session.

To access them, proceed as follows:

  1. Select the Tools -> Options command.
    The Options dialog box appears.

  2. Select the Digital Mockup category in the left-hand box. Various tabs appear.

  3. Click DMU Space Engineering tab.
    The DMU Space Engineering tab page is displayed.

    The DMU Space Engineering tab lets you customize options dealing with:

  4. Other tabs, located in Digital Mockup->DMU Space Analysis category, are also needed for DMU Space Engineering Assistant.

    Make sure, the client and servers point to the same rule-based clash.
  5. You also need to customize the 3D Accuracy setting located in  Performances tab page of General > Display category.

    Performances lets you customize performance settings

    Make sure the 3D Accuracy value is identical on each and every user workstation and servers.

  6. You also need to customize options in the Infrastructure > Product Structure category. Click the Tree Customization tab

    Click here if you want to know more about Product Structure category options.

  7. Other tabs located in General ->Parameters and Measures category interfere with SPE product

    • Knowledge (Parameter tree view)

    • Units lets you set the required units

    • Language lets you specify the options you may need to check when working with Knowledge browsers

    Click here if you want to know more about General category options.

  8. Set options in these tabs according to your needs.

  9. Click Ok in the Options dialog box when done