What's New?

New Functionalities

Scan Integration 
You can scan the part. Integrating the Functional Features in the Scan process gives a quick and efficient way to understand the design of a Functional Molded Part. It is useful for the analysis of the better understanding of the complex design.
Creating Technological Results
This capability supplies technological information about the features included in a body. This information can then be reused at any stage of your design by downstream applications.
Creating Chordal Fillets
The Chordal Fillet command is used to control the width of the fillet (distance between the 2 rolling edges) which is also called as Chordal length.

Enhanced Functionalities

Creating Edge Fillets
The Conical parameter option allows you to vary the section of the fillet.
Creating Face-Face Fillets
 The Conical parameter option allows you to vary the section of the fillet. 
Creating Variable Radius Fillets
The Conical parameter option allows you to vary the section of the fillet.
Fillet face-face hold-curve with keep edge
You can specify the edge(s) of support body to be kept and creates Fillet Surfaces with Hold Curve and Keep Edge as support wherever necessary.
Ability to select the draft properties of other bodies
You can access the draft property which is defined in another solid functional set. All draft properties are displayed and can be selected for feature definition even though draft properties are defined in different solid functional sets.
Display Body Under Functional Features 
It will simplify the specification tree and improve management of the insertion point by providing a mechanism for users to gather bi-dimensional and tri-dimensional elements within the same work environment. The bodies referenced by FMP features will be displayed in the specification tree only under the pointing feature.
Importing a Single Specification 
A Functional Import consists of a copy of geometry from one part to another part.
To Shell Option
To Shell option for length in functional features will be available only when shellable feature is present in solid functional set. If no shellable feature is present in PartBody, the To Shell option will not be displayed in the length for concerned functional features.
Workbench simplification
This improves the usability by simplifying the Functional Molded Part workbench with less icons. Only important features are presented as icons and all other features are accessed through the menus. This improves the ergonomics of the Functional Molded Part workbench. You need not switch over another workbench for accessing certain features.
Support of all 3D sketched geometries
You can select 2Doutput, 2DoutputProfile and 2DlayoutProfile for the input profile definition wherever applicable and also for limiting element.