This section explains and illustrates different methods to create bends on walls. Bends can only be created between walls, whether manually or automatically, and not between any other Sheet Metal features, such as stamps for example.
|
|
Manually create bends from walls: select the two walls, set the bend radius value, the bend extremities, and specify the use of corner relief |
|
|
Generate bends automatically: select the part, then a reference wall |
|
|
Create conical bends: select the part, and choose a reference wall |
|
|
Create bends from a line: select a sketch, set the creation mode and limiting option, set the radius and angle in relation to the selected sketch. |