General Environment Toolbar

The General Environment Tool Bar contains the following buttons:

Analyze Item: See Generating Detail Information

Query Auto-Parts: See Query or Convert Auto-parts

Change Current Axis: See Changing the Current Axis

Change Current Axis and Snap Compass:  See Changing the Current Axis

Current Axis History:  See Generating Detail Information

Show/Hide Connector Display on a Part: See Show/Hide Connectors

Convert to Design Mode

Offset Plane: See Using Offset Planes

Advanced Offset Plane: See Using Offset Planes

Toggle Manipulation Handle Mode: See Manipulation Handle Mode

Toggle Dimming Mode:

Snap to Steps Off Current Axis: See Using the Step Input Box and Construction Elements

Snap to Steps Off Last Position: See Using the Step Input Box and Construction Elements

Snap to XY Construction Planes: See Using the Step Input Box and Construction Elements

Snap to All Construction Planes: See Using the Step Input Box and Construction Elements

Snap to Elevation Planes: See Using the Step Input Box and Construction Elements

Snap to Drafting Elements: See Using the Step Input Box and Construction Elements

Place New Part Under Active Parent:  See Placing a Part in a Sub-document

Activate Product's Parent:  See Activate the Product/Product Parent

Activate Grids:  See Activating the Plane System Grid

Clash Detection (Off): See Detecting Clash in Parts Placement

Clash Detection (On):   See Detecting Clash in Parts Placement

Clash Detection (Stop): See Detecting Clash in Parts Placement