|8DF4 ::: IBM Image Adapter/A|
NOTE: For part numbers, connectors and video cables information on the IBM Image and Image-I Adapters see the MCA Base reference document IBM Image Adapters.
Technical information and illustrations contained in this page are edited excerpts from the EPRM, Copyright © IBM Corp. 1992-97.
The Image Adapter/A is a high-resolution adapter, capable of driving displays up to 128 MHz, with a maximum screen addressability of 1600x1200 pixels. The driver output impedance for video signals is 75 ohms. The sync lines of the adapter are TTL levels driven by 4 ma drivers, therefore the termination should at the very least be at 750 ohms.
The Image Adapter/A is available in three versions:
The three versions of the Image Adapter/A support IBM analog displays equipped with a 15-pin direct-drive analog interface. The adapters can be installed in any IBM PS/2 Micro Channel system unit, except portable models.
Image Adapter/A Options
You can attach optional features only to the Image Adapter/A.
For a single display configuration, you must always attach the display to the display connector on the Image Adapter/A and not to the system-unit display connector.
Image Adapter/A 15-pin Analog Video Connector
ADF Adapter Description File
|Legal | Copyright||id-page | prev | next | top|