The General Environment Tool Bar contains the following buttons:
Analyze Item: See Generating Detail Information | |
Query Auto-Parts: See Query or Convert Auto Parts | |
Change Current Axis: See Changing the Current Axis | |
Change Current Axis and Snap Compass: See Changing the Current Axis | |
Current Axis History: See Generating Detail Information | |
Show/Hide Connector Display on a Part: See Show/Hide Connectors | |
Convert to Design Mode: | |
Offset Plane: See Using Offset Planes and Advanced Offset Planes | |
Advanced Offset Plane: See Using Offset Planes and Advanced Offset Planes | |
Toggle Manipulation Handle Mode: See Manipulation Handle Mode | |
Toggle Dimming Mode: | |
Snap to Steps Off Current Axis: See Using the Step Input Box and Construction Elements | |
Snap to Steps Off Last Position | |
Snap to XY Construction Planes | |
Snap to All Construction Planes | |
Snap to Elevation Planes | |
Snap to Drafting Elements |
Place New Part Under Active Parent: See Placing a Part in a Sub-Document | |
Activate Product's Parent: See Activating the Product/Product Parent | |
Clash Detection (Off): See Detecting Clash in Parts Placement | |
Clash Detection (On): See Detecting Clash in Parts Placement | |
Clash Detection (Stop): See Detecting Clash in Parts Placement |