General Environment Toolbar

The General Environment Toolbar contains the following buttons:

 Analyze Item: See Generating Detail Information
   Change Current Axis: See Changing the Current Axis
 Change Current Axis and Snap Compass:  See Changing the Current Axis
 Current Axis History: 
 Offset Plane: See Using Offset Planes
   Advanced Offset Plane: See Using Offset Planes
WD0103snapgrid4.gif (582 bytes)  Snap to Steps Off Current Axis: See Using the Step Input Box and Construction Elements for this and the following buttons:
WD0103snaplast6.gif (1215 bytes) Snap to Steps Off Last Position
WD0103snapXY7.gif (1220 bytes) Snap to XY Construction Planes
WD0103snapall8.gif (1237 bytes) Snap to All Construction Planes
WD0103snapelev9.gif (1161 bytes) Snap to Elevation Planes
WD0103snapdrafting10.gif (1221 bytes) Snap to Drafting Elements
 Toggle Manipulation Handle Mode: See Manipulation Handle Mode
  WD0103dimon11.gif (598 bytes)  Toggle Dimming Mode: See Making an Element Active
WD0103activate_elem12.gif (1255 bytes)  Activate Parent: See Making an Element Active for this and the following buttons:
 Activate Product's Parent
WD0103activatearea14.gif (1162 bytes) Activate Area 
Activate Network
 Clash Detection (Off): See Detecting Clash in Parts Placement for this and the following buttons:
 Clash Detection (On):
Clash Detection (Stop):