Creating Bends on Walls


This section explains and illustrates different methods to create bends on walls. Bends can only be created between walls and not between any other Sheet Metal features, such as stamps for example.

Manually create bends from wall: select the two walls, set the bend radius value, the bend extremities, and specify the use of corner relief
Create conical bends: select the two walls, set the right and left bend radius values as well as the bend extremities.
Create flat bends: select a sketch, set the creation mode and limiting option, set the radius and angle in relation to the selected sketch.
Fold and Unfold bends: select the two faces and the fold angle.