Managing 3D Annotations in 3D XML Files

This task explains you how to manage 3D Annotations in 3D XML files:
 

Save

  • The Save as 3D XML capability is provided by File > Save as... or File > Save Management > Save as... For more information, please refer to Saving Documents in Other Formats in CATIA Infrastructure User's Guide.
  • The Save as 3D XML capability in batch mode is not provided.
  • To save 3D annotations in a 3D XML file, select the 3D annotation check box in Tools > Options > General > Compatibility > 3D XML.
  • The 3D annotation option is active for the Dynamic Tessellation and Static Tessellation geometry representation formats, selected in Tools > Options > General > Compatibility > 3D XML. The 3D annotations will be saved in 3D XML file for these geometry representations.

  • The XmlTessellation geometry representation format does not support saving of 3D annotations in a 3D XML file. The 3D annotations option will be inactive in this case.

  • Only 3D annotations of CATParts are taken into account. 3D annotations created at a product or a process level are not taken into account.
  • Note that Datum Reference Frame and restricted area features are not saved in 3D XML files as they are useless for review process.
  • The 3D annotations of .model and .cgr documents are not taken into account.
  • Both the check boxes Under Geometric Feature nodes and Under View/Annotation Plane nodes, in Tools > Options > Mechanical Design > Functional Tolerancing & Annotation > Display must be cleared before saving the document.
 

Display

When you open a 3D XML file containing 3D annotations, they are not displayed.


When the 3D XML has been created from a CATProduct document, to display the 3D annotations both in the 3D window and in the specification tree:

  1. Activate the root product of your document.

  2. Switch to the Product Functional Tolerancing & Annotation workbench.

  3. Click List Annotation Set  Switch On/Switch Off .

  4. Click Enable All.

  5. Click OK.

When the 3D XML has been created from a CATPart document, to display the 3D annotations both in the 3D window and in the specification tree:

  1. Create a new CATProduct document.

  2. Insert under the root product the 3D XML document (Existing Component command).

  3. Be sure that the root product is activated.

  4. Switch to the Product Functional Tolerancing & Annotation workbench.

  5. Click List Annotation Set  Switch On/Switch Off .

  6. Click Enable All.

  7. Click OK.

3D annotations contained in a 3D XML files have the following specificities:
  • they are not editable,
  • they cannot be moved,
  • they cannot be copied nor deleted.
  • their properties are not editable with the exception of their Lines and Curves properties (Color, Lintype, Thickness) that can be edited within the session but those modifications will not be saved.
 

Query

To access to the query capabilities:

Click 3D-Annotation-Query Switch On/Switch Off in Functional Tolerancing & Annotation,
Click Select   in DMU Dimensioning & Tolerance Review.

For both workbenches:

  • If you select a geometrical element, all the 3D annotations that are applied to it are highlighted.
  • If you select a 3D annotation or a constructed geometry or a restricted area, all the geometrical elements it is linked to are highlighted.
    If frame dimensions are attached to it, they are highlighted too.
    If the 3D annotation is a geometrical tolerance with datum reference frame, the corresponding datum annotations are highlighted too.
  • If you put the mouse pointer on top of a NOA annotation or a flagnote annotation, the hidden text and hyperlink paths that are attached to it are displayed in a tool tip.
  • If you put the mouse pointer on top of a dimension with a fitting tolerance or with a general tolerance, the corresponding numerical upper and lower tolerances are displayed in a tool tip.

For DMU Dimensioning & Tolerance Review:

  • Related Surfaces displays all the geometrical elements at least a 3D annotation is applied to, in the color of your choice.
  • Go to Hyperlinks opens the documents that are attached to flagnotes or NOA.
 

Filter

Click Filter to filter the 3D annotations according to all the criteria that are proposed (note that only the ones that are relevant for the 3D annotations that are loaded in the V5 session are proposed):

  • All
  • None
  • By type
  • By sub-type
  • By value
  • By feature:
    • Annotation sets
    • Views
    • Geometrical elements
  • By default annotation
  • By capture (you can also also display a capture by using the Display contextual menu command on capture feature).