[ Bottom of Page | Previous Page | Next Page | Contents | Index | Library Home |
Legal |
Search ]
Commands Reference, Volume 4
rmcondresp Command
Purpose
Deletes
the link between a condition and one or more responses.
Syntax
To delete the link between a condition and one or more responses:
rmcondresp [-q] [-h] [-TV] condition[:node_name] [response [response...]]
To delete all of the links to one or more responses:
rmcondresp [-q] -r [-h] [-TV] response1 [response2...][:node_name]
Description
The rmcondresp command deletes the link between a condition and
one or more responses. The response is no longer run when the condition occurs.
Use the -r flag to specify that the command parameters consist only of responses. This
deletes all links to conditions for these responses. If only a condition is
specified, links to all responses for that condition are deleted.
Flags
- -q
- Does not return an error when either condition or response does not exist.
- -r
- Indicates that all command parameters are responses. There are no conditions
specified. This command removes links from all conditions that are linked
to the specified responses.
- -h
- Writes the command's usage statement to standard output.
- -T
- Writes the command's trace messages to standard error. For your software
service organization's use only.
- -V
- Writes the command's verbose messages to standard output.
Parameters
- condition
- Specifies the name of the condition linked to the response. The condition
is always specified first unless the -r flag is used.
- response
- Specifies the name of a response or more than one response. The links
from the specified responses to the specified condition are removed.
- node_name
- Specifies the node where the condition is defined. If the -r flag is used, it is the
node where the response is defined. node_name is a node within the
scope determined by the CT_MANAGEMENT_SCOPE environment variable.
Security
The user needs write permission for the IBM.Association resource class
to run rmcondresp. Permissions are specified in the access control
list (ACL) file on the contacted system. See the RSCT Guide and Reference for details on the ACL file and how to
modify it.
Exit Status
- 0
- The command ran successfully.
- 1
- An error occurred with RMC.
- 2
- An error occurred with a command-line interface script.
- 3
- An incorrect flag was entered on the command line.
- 4
- An incorrect parameter was entered on the command line.
- 5
- An error occurred that was based on incorrect command-line input.
Environment Variables
- CT_CONTACT
- Determines the system where the session with the resource monitoring
and control (RMC) daemon occurs. When CT_CONTACT is set to a host name or
IP address, the command contacts the RMC daemon on the specified host. If
CT_CONTACT is not set, the command contacts the RMC daemon on the local system
where the command is being run. The target of the RMC daemon session and
the management scope determine the resource classes or resources that are
processed.
- CT_MANAGEMENT_SCOPE
- Determines the management scope that is used for the session with the
RMC daemon in processing the resources of the event response resource manager
(ERRM). The management scope determines the set of possible target nodes
where the resources can be processed. The valid values are:
- 0
- Specifies local scope.
- 1
- Specifies local scope.
- 2
- Specifies peer domain scope.
- 3
- Specifies management domain scope.
If this environment variable is not set,
local scope is used.
Standard Output
When the -h flag is specified, this command's usage statement is written to standard
output. All verbose messages are written to standard output.
Standard Error
All trace messages are written to standard error.
Examples
These examples apply to standalone systems:
- To delete the link between the condition "FileSystem space used" and
the response "Broadcast event on-shift", run this command:
rmcondresp "FileSystem space used" "Broadcast event on-shift"
- To delete the links between the condition "FileSystem space used" and
all of its responses, run this command:
rmcondresp "FileSystem space used"
- To delete the links between the condition "FileSystem space used" and
the responses "Broadcast event on-shift" and "E-mail root any time", run
this command:
rmcondresp "FileSystem space used" "Broadcast event on-shift" "E-mail root any time"
- To delete the links between the response "Broadcast event on-shift"
and all of the conditions that use it, run this command:
rmcondresp -r "Broadcast event on-shift"
These examples apply to management domains:
- To delete the link between the condition "FileSystem space used" on the
management server and the response "Broadcast event on-shift", run this
command on the management server:
rmcondresp "FileSystem space used" "Broadcast event on-shift"
- To delete the links between the condition "FileSystem space used" on the
managed node nodeB and the responses "Broadcast event on-shift"
and "E-mail root any time", run this command on the management server:
rmcondresp "FileSystem space used":nodeB \
"Broadcast event on-shift" "E-mail root any time"
These examples apply to peer domains:
- To delete the links between the condition "FileSystem space used" on nodeA in the domain and the responses "Broadcast event on-shift" and
"E-mail root any time", run this command on any node in the domain:
rmcondresp "FileSystem space used":nodeA \
"Broadcast event on-shift" "E-mail root any time"
- To delete the links between all conditions on nodeA in the domain
and the response "Broadcast event on-shift", run this command on any node
in the domain:
rmcondresp -r "Broadcast event on-shift":nodeA
Location
- /usr/sbin/rsct/bin/rmcondresp
- Contains the rmcondresp command
Related Information
ERRM commands: lscondresp, mkcondition, mkcondresp, mkresponse, startcondresp, stopcondresp
Files: rmccli
Books: see the RSCT Guide and Reference for more information about ERRM operations
[ Top of Page | Previous Page | Next Page | Contents | Index | Library Home |
Legal |
Search ]