[ Bottom of Page | Previous Page | Next Page | Contents | Index | Library Home |
Legal |
Search ]
Commands Reference, Volume 3
mktcpip Command
Purpose
Sets the required values for starting TCP/IP on a host.
Syntax
mktcpip { -S Interface | -h HostName -a Address -i Interface [ -s ] [ -m SubnetMask ] [ -r RingSpeed ] [ -t CableType ] [ -g Gateway ] [ -n NameServerAddress [ -d Domain ] ] [ [ -c Subchannel ] -D Destination ] }
Description
The mktcpip command sets the
required minimal values required for using TCP/IP on a host machine. These
values are written to the configuration database. The basic functions of the mktcpip command include:
- Setting the host name in both the configuration
database and the running machine.
- Setting the IP address of the interface in the
configuration database.
- Making entries in the /etc/hosts file for the host name and IP address.
- Setting the domain name and IP address of the
nameserver, if applicable.
- Setting the subnetwork mask, if applicable.
- Adding a static route to both the configuration
database and the running machine, if applicable.
- Starting the specified TCP/IP daemons.
You can use the Network application in Web-based System Manager
(wsm) to change network characteristics. You could also use the System Management
Interface Tool (SMIT) smit mktcpip fast path to run
this command.
Flags
-a Address |
Sets the Internet address of the host. Specify the address in dotted
decimal notation. Each network interface on the host should have a unique
Internet address. The following is the standard format for setting the Internet
address:
127.10.31.2 |
-c Subchannel |
Specifies the subchannel address for a System/370 channel
adapter. |
-D Destination |
Sets the destination address for a static route. Specify the address
in dotted decimal notation. The following is the standard format for setting
the destination address for a static route:
192.9.52.1 |
-d Domain |
Specifies the domain name of the name server the host should use
for name resolution, if any. The domain name should be in the following format:
subdomain.subdomain.rootdomain |
-g Gateway |
Sets the gateway address for a static route. Specify the address
in dotted decimal notation. The following is the standard format for setting
the gateway address for a static route:
192.9.52.0 |
-h Hostname |
Sets the name of the host. If using a domain naming system, the domain
and any subdomains must be specified. The following is the standard format
for setting the host name:
hostname
The following is the standard format for setting the host name in a domain
naming system:
hostname.subdomain.subdomain.rootdomain |
-i Interface |
Specifies a particular network interface, for example:
tr0 |
-m SubnetMask |
Specifies the mask the gateway should use in determining the appropriate
subnetwork for routing. The subnet mask is a set of 4 bytes, as in the Internet
address. The subnet mask consists of high bits (1s) corresponding to the bit
positions of the network and subnetwork address, and low bits (0s) corresponding
to the bit positions of the host address. |
-n NameserverAddress |
Specifies the Internet address of the name server the host uses for
name resolution, if applicable. The address should be entered in dotted decimal
notation, as follows:
127.1.0.1 |
-r RingSpeed |
Specifies the ring speed for a token-ring adapter. Valid values for
the RingSpeed variable are either 4- or 16-Mbps. |
-S Interface |
Retrieves information for System Management Interface Tool (SMIT)
display. |
-s |
Starts the TCP/IP daemons. |
-t CableType |
Specifies cable size for Standard Ethernet or IEEE 802.3 Ethernet
networks. Valid values for the CableType variable
are dix for thick cable, bnc for
thin cable, or N/A for Not Applicable. The -t CableType flag should be used only for Standard
Ethernet (en) and IEEE 802.3 Ethernet (et) interfaces. |
Examples
To set the required values for starting TCP/IP enter:
mktcpip -h fred.austin.century.com -a 192.9.200.4 -i en0 \
-n 192.9.200.1 -d austin.century.com -s
Related Information
The hostname command, hostent
command.
The resolv.conf file format.
Naming in AIX 5L Version 5.2 System Management Guide: Communications and Networks.
TCP/IP Addressing in AIX 5L Version 5.2 System Management Guide: Communications and Networks.
For information on installing the Web-based System Manager, see Chapter 2: Installation and System Requirements in AIX 5L Version 5.2 Web-based System Manager Administration Guide.
System Management Interface
Tool (SMIT): Overview in AIX 5L Version 5.2 System Management Concepts: Operating System and Devices.
[ Top of Page | Previous Page | Next Page | Contents | Index | Library Home |
Legal |
Search ]