This section provides installation and configuration information for PCI adapters. Topics discussed are support and configuration for the PCI Wide Area Network (WAN) Adapters (2-Port Multiprotocol (PCI) , and ARTIC960Hx(PCI)).
This section explains the installation and configuration requirements for the 2-Port Multiprotocol adapter (PCI), and the ARTIC960Hx PCI adapter.
The 2-Port Multiprotocol Adapter high-level data link control (HDLC) device driver is a component of the communication I/O subsystem. This device driver provides support for the HDLC operation over the 2-Port Multiprotocol adapter at speeds up to 1.544Mbps.
The following options provide access to the 2-Port Multiprotocol HDLC Network device driver:
The 2-port Multiprotocol Adapter device driver allows connectivity to remote host systems using the 2-port Multiprotocol adapter, either directly over a leased line or over switched circuits. The device driver can provide a gateway between work group environments and remote data processing facilities.
The following table explains how to configure a 2-Port Multiprotocol adapter.
Task | SMIT fast path | Web-based System Manager Management Environment1 |
---|---|---|
Add a Device Driver to the Adapter | smit mkhdlcdpmpdd |
|
Reconfigure the Device Driver on the Adapter | smit chhdlcdpmpdd |
|
Remove a Device Driver on the Adapter | smit rmhdlcdpmpdd |
|
Make a Defined Device Driver Available | smit cfghdlcdpmpdd |
|
Add an SDLC COMIO Emulator on the Adapter | smit mksdlcsciedd |
|
Reconfigure the SDLC COMIO Emulator on the Adapter | smit chsdlcsciedd |
|
Remove an SDLC COMIO Emulator on the Adapter | smit rmsdlcsciedd |
|
Make a Defined SDLC COMIO Emulator Available | smit cfgsdlcsciedd |
|
The ARTIC960Hx PCI Adapter MPQP COMIO device driver emulator is a component of the communication I/O subsystem. This device driver provides support for the ARTIC960Hx PCI adapter at a maximum speed of 2M bps. The modems used must provide the clocking, since only external clocking is supported.
The following options provide access to the ARTIC960Hx PCI Adapter MPQP COMIO device driver:
These options require use of the mpqx special file, which allows access to the ARTIC960Hx PCI adapter through the MPQP COMIO emulation device driver. This device driver must be installed and configured for each port on the ARTIC960Hx PCI adapter. The mpqx special file resides in the /dev directory.
The MPQP COMIO emulation device driver allows connectivity to remote host systems using the ARTIC960Hx PCI adapter, either directly over a leased line. The device driver can provide a gateway between work group environments and remote data processing facilities.
The following table explains how to configure the MPQP COMIO Emulation Driver over the ARTIC960Hx PCI Adapter.
Task | SMIT fast path | Web-based System Manager Management Environment1 |
---|---|---|
Add a Device Driver | smit mktsdd |
|
Reconfigure the MPQP COMIO Emulation Driver | smit chtsdd |
|
Remove a Device Driver | smit rmtsdd |
|
Configure a Defined Device Driver | smit cfgtsdd |
|
Add a Port | smit mktsdports |
|
Reconfigure an MPQP COMIO Emulation Port | smit chtsdports |
|
Remove a Port | smit rmtsdports |
|
Configure a Defined Port | smit cfgtsdports |
|
Trace the MPQP COMIO Emulation Driver | smit trace_link |
|