Stores a word of data from a floating-point register into a specified location in memory.
| Bits | Value |
|---|---|
| 0-5 | 52 |
| 6-10 | FRS |
| 11-15 | RA |
| 16-31 | D |
| stfs | FRS, D( RA) |
The stfs instruction converts the contents of floating-point register (FPR) FRS to single-precision and stores the result into the word of storage addressed by the effective address (EA).
If general-purpose register (GPR) RA is not 0, the EA is the sum of the contents of GPR RA and D, a 16-bit signed two's complement integer sign-extended to 32 bits. If GPR RA is 0, then the EA is D.
The stfs instruction has one syntax form and does not affect the Floating-Point Status and Control Register or Condition Register Field 0.
The following code stores the single-precision contents of FPR 6 into a location in memory:
.csect data[rw] buffer: .long 0 # Assume FPR 6 contains 0x4865 6C6C 6F20 776F. # Assume GPR 4 contains the address of csect data[rw]. .csect text[pr] stfs 6,buffer(4) # buffer now contains 0x432B 6363.
Floating-Point Load and Store Instructions .