You can gather information about your system configuration by:
Enter the following command to show your system configuration on your screen:
lscfg
The lscfg command shows the name, location, and description of all hardware in your system.
Note: You need root user authority to use the snap command.
Enter the following command to gather all configuration information in a tar file and copy it to diskette:
snap -a -o /dev/rfd0
The snap command in this example uses the -a flag to gather all information about your system configuration. The -o flag copies the compressed tar file to the device you name. /dev/rfd0 names your disk drive.
Enter the following command to gather all configuration information in a tar file and copy it to tape:
snap -a -o /dev/rmt0
/dev/rmt0 names your tape drive.
Go back to Hardware Diagnostics