RECOV ECC Error Identifiers for the Error Log

AIX Version 4.3 Problem Solving Guide and Reference

RECOV ECC Error Identifiers for the Error Log

This category of identifiers contains the following error labels:

RECOV ECC ERR

Go back to the categories of Error Identifiers .

RECOV ECC ERR

Error Description: MEMORY FAILURE

This error indicates either the failure of a SIMM in a memory card, or the failure of a memory card.

DETAIL DATA

STATUS CODE	Indicates the type of the parity error: 0500 Single bit parity error 0501 Multiple bit parity error 0502 No memory parity error 0503 Incoherent ASIC status 0504 Incoherent interleaving table
CARD NUMBER	The card number (from 0 to 3 ) of the affected card.
SIMM LOCATIONS	The locations of the failing SIMMs. (Up to 4 SIMMs may be defective at one time.) The leftmost bit indicates SIMM number 1, while the rightmost bit indicates SIMM number 16.
PHYSICAL MEMORY ADDRESS
	Address of the physical memory where the failure was detected.

Notes:

T he CARD NUMBER and the SIMM LOCATIONS data are valid only if the STATUS CODE is equal to 0 or 1 .

The RECOV ECC ERR error identifier apply to systems with either SIMM or DIMM memory modules.