[ Previous | Next | Contents | Search ]
3270 Host Connection Program 2.1 and 1.3.3 for AIX: Guide and Reference

Using Display Session on DEC VT100 Keyboards

The DEC VT100 must be configured with the keypad in application mode for the e789 command to function properly. To accomplish this, enter the following command at the VT100 terminal:

echo "\033\075"
Note: For Japanese languages, the PS/55 with DEC VT100 interface can be used to run 3270 Japanese language applications. The TERM variable should be set to VT100. The PS/55 requires both:

The following table contains the default HCON key functions on the DEC VT100 terminal keyboard. See "Special Keys" for a description of these functions.

Default Key Functions on DEC VT220 Keyboards
Function Press Function Press
TAB TAB PF14 N/A
BTAB N/A PF15 N/A
ENTER Keypad Enter PF16 N/A
SYSREQ Keypad 3 PF17 N/A
CLEAR Keypad . (period) PF18 N/A
BACKSPACE BACKSPACE PF19 N/A
CHGDIS N/A PF20 N/A
INSERT Keypad 0 PF21 N/A
DELETE DELETE PF22 N/A
HOME N/A PF23 N/A
PA1 Keypad 1 PF24 N/A
PA2 Keypad 2 PRINT N/A
PA3 N/A SAVES N/A
SPACEOF N/A REPLS N/A
DOWN Down Arrow BTABW Ctrl-A
DDOWN N/A EOF Ctrl-B
RIGHT Right Arrow SHELL Ctrl-C
RRIGHT N/A QUIT Ctrl-D
LEFT Left Arrow ERASE Ctrl-E
LLEFT N/A FTABW Ctrl-F
UP Up Arrow ENDF Ctrl-G
UUP N/A BACKF Ctrl-K
NEWLINE RETURN LENDF Ctrl-L
PF1 PF1 NEWLINE Ctrl-M
PF2 PF2 FMARK Ctrl-N
PF3 PF3 NEXT Ctrl-O
PF4 PF4 POREST Ctrl-P
PF5 Keypad 7 RESET Ctrl-R
PF6 Keypad 8 REFRESH Ctrl-T
PF7 Keypad 9 DUP Ctrl-U
PF8 Keypad - (minus) HCONUTIL Ctrl-V
PF9 Keypad 4 DELWORD Ctrl-W
PF10 Keypad 5 DOIA Ctrl-X
PF11 Keypad 6 CLICK Ctrl-Y
PF12 Keypad , (comma) JOBCTRL Ctrl-Z
PF13 N/A ATTN Ctrl-] (right bracket)


CURSEL Ctrl-\ (backslash)

[ Previous | Next | Contents | Search ]