Administration Guide

SDR objects with IP addresses and host names

The following SDR objects reference the host name and IP address in the SP system for PSSP subsystems:

|Adapter

|Contains the IP addresses used for adapters, like the following: |

|Switch adapters (css0 and css1)

|Ethernet

|FDDI

|Token ring |

|

|Aggregate_IP

|Contains the IP address used with the ml0 interface which provides |aggregate IP function for the css0, css1, or both |adapter interfaces for a node.

Frame

Contains the Monitor and Control Node MACN, and HACWS backup_MACN attributes on the control workstation that work with host names. Also contains the IP addresses of the HMC for each p690 frame.

Node

Contains the initial or reliable host names, the DCE host name, and the IP address for SP nodes and boot servers. The nodes are organized by system partitions.

Pool

Contains host names for Resource Manager pools.

SP

Contains control workstation IP address and host names. Contains the host name used with Network Time Protocol (NTP), user management, and accounting services.

SP_ports

Contains the host name used with hardmon and the control workstation.

Switch_partition

Contains host name for primary and backup nodes used to support the SP Switch.

Switch_plane

Contains host name for primary and backup nodes used to support the SP Switch2.

Syspar

Contains the IP address and SP_NAME with system partitions.

Syspar_map

Provides the host name and IP address on the control workstation for system partitions.

pmandConfig

Captures the SP node host name data working problem management.

DependentNode

Contains host name for dependent extension node.

DependentAdapter

Contains IP address for dependent extension node adapter.