Administration Guide

Removing extension nodes and extension node adapters

You can remove information for extension nodes and extension node adapters from the SDR by using either the SMIT or command line interface.

Note:

You must reset the extension node (using either enadmin -a reset or enrmnode -r) before removing the extension node adapter or extension node.

From SMIT

1. Access the Delete Database Information menu:

   ENTER

   smit delete_data

   • The Delete Database Information menu appears.

2. Delete extension node information:

   SELECT

   Delete Extension Node Information

   • The Delete Extension Node Information menu appears.

   ENTER

   Enter values to delete extension node information:

   Reset the Extension Node?

   yes or no. yes notifies the SNMP Agent on the extension node to remove the node from the switch network.

   Node Number

   The number ID assigned to the extension node.

   SELECT

   OK

3. Return to the Delete Database Information menu.
4. Delete extension node adapter information:

   SELECT

   Delete Extension Node Adapter Information

   • The Delete Extension Node Adapter Information menu appears.

   ENTER

   Enter value to delete extension node adapter information:

   Node Number

   The number ID assigned to the extension node.

   SELECT

   OK

From the command line

1. Use the enrmnode command to remove extension node information from the SDR.
2. Use the enrmadapter command to remove extension node adapter information from the SDR.

See the book PSSP: Command and Technical Reference for information on these commands.