| | | All Documents by Last Update / Machine Type / Doc Type | Doc_Id |
| 11-01-99 | | |
| 2011 | | |
| | Service Hints & Tips | | |
| | CD-ROM Drives | | |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| | Hardware Installation/Configuration | | |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| 2121 | | |
| | Service Hints & Tips | | |
| | CD-ROM Drives | | |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| | Hardware Installation/Configuration | | |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| 2123 | | |
| | Service Hints & Tips | | |
| | CD-ROM Drives | | |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| | Hardware Installation/Configuration | | |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| 2133 | | |
| | Service Hints & Tips | | |
| | CD-ROM Drives | | |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| | Hardware Installation/Configuration | | |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| 2134 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | Cables | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | CD-ROM Drives | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Diagnostics | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | DVD Drives | | |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Entertainment Software | | |
| | | Aptiva - General Protection Fault in MPEG.DLL | DJON-3FWQNV |
| | Error Messages | | |
| | | Aptiva - General Protection Fault in MPEG.DLL | DJON-3FWQNV |
| | Hard Drives | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Mwave | | |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Video | | |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| 2136 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2136 - How to connect CD-ROM audio cable | MNOK-3UUS85 |
| | Cables | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2136 - How to connect CD-ROM audio cable | MNOK-3UUS85 |
| | CD-ROM Drives | | |
| | | Aptiva - 2136 Diagnostics - CD-ROM Drive | RMIE-3G8FUY |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - 2136 Removals and replacements - Bays 1, 2, 3 (5.25-In. Internal /External Bays) | MNOK-3ZXQUE |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2136 - How to connect CD-ROM audio cable | MNOK-3UUS85 |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - 2136 CD-ROM Drive & Jumper Settings | RMIE-3G6C3A |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Diagnostics | | |
| | | Aptiva - 2136 Diagnostics - CD-ROM Drive | RMIE-3G8FUY |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | Diskette Drives | | |
| | | Aptiva - 2136 Removals and replacements - Bays 1, 2, 3 (5.25-In. Internal /External Bays) | MNOK-3ZXQUE |
| | DVD Drives | | |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hard Drives | | |
| | | Aptiva - 2136 Removals and replacements - Bays 1, 2, 3 (5.25-In. Internal /External Bays) | MNOK-3ZXQUE |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - 2136 Removals and replacements - Bays 1, 2, 3 (5.25-In. Internal /External Bays) | MNOK-3ZXQUE |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2136 - How to connect CD-ROM audio cable | MNOK-3UUS85 |
| | | Aptiva - 2136 CD-ROM Drive & Jumper Settings | RMIE-3G6C3A |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Jumper/Switch Settings | | |
| | | Aptiva - 2136 CD-ROM Drive & Jumper Settings | RMIE-3G6C3A |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| 2137 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2137 - How to connect CD-ROM audio cable | MNOK-3UURW8 |
| | | Aptiva - Clicking noise heard in speakers | PMYS-3N9SSR |
| | Cables | | |
| | | Aptiva - 2137 - How to connect CD-ROM audio cable | MNOK-3UURW8 |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | CD-ROM Drives | | |
| | | Aptiva - 2137 - How to connect CD-ROM audio cable | MNOK-3UURW8 |
| | | Aptiva -- 2137-EG1 or 2137-EG3 System Fails to Boot | DETR-3WLP7S |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - Clicking noise heard in speakers | PMYS-3N9SSR |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2137/2138 Diagnostics - Factory installed storage devices | DETR-43VQWX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - 2137/2138 Diagnostics - CD-ROM drive | DETR-43VRJS |
| | | Aptiva - 2137 CD-ROM drive jumper settings | JWOE-3LDNNW |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Covers/Bezels | | |
| | | Aptiva - 2137 Bay panels | PMYS-3LLJYJ |
| | Diagnostics | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - 2137/2138 Diagnostics - Factory installed storage devices | DETR-43VQWX |
| | | Aptiva - 2137/2138 Diagnostics - CD-ROM drive | DETR-43VRJS |
| | Diskette Drives | | |
| | | Aptiva - 2137/2138 Diagnostics - Factory installed storage devices | DETR-43VQWX |
| | DVD Drives | | |
| | | Aptiva - 2137/2138 Diagnostics - Factory installed storage devices | DETR-43VQWX |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hard Drives | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - 2137/2138 Diagnostics - Factory installed storage devices | DETR-43VQWX |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - 2137 - How to connect CD-ROM audio cable | MNOK-3UURW8 |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2137 Bay panels | PMYS-3LLJYJ |
| | | Aptiva - 2137 CD-ROM drive jumper settings | JWOE-3LDNNW |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Jumper/Switch Settings | | |
| | | Aptiva - 2137 CD-ROM drive jumper settings | JWOE-3LDNNW |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Windows 95 | | |
| | | Aptiva -- 2137-EG1 or 2137-EG3 System Fails to Boot | DETR-3WLP7S |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| 2138 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2138 - How to connect CD-ROM audio cable | MNOK-3UUS2L |
| | Cables | | |
| | | Aptiva - 2138 - How to connect CD-ROM audio cable | MNOK-3UUS2L |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | CD-ROM Drives | | |
| | | Aptiva - 2138 - How to connect CD-ROM audio cable | MNOK-3UUS2L |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - 2137/2138 Diagnostics - Factory installed storage devices | DETR-43VQWX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - 2137/2138 Diagnostics - CD-ROM drive | DETR-43VRJS |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Diagnostics | | |
| | | Aptiva - 2137/2138 Diagnostics - Factory installed storage devices | DETR-43VQWX |
| | | Aptiva - 2137/2138 Diagnostics - CD-ROM drive | DETR-43VRJS |
| | Diskette Drives | | |
| | | Aptiva - 2137/2138 Diagnostics - Factory installed storage devices | DETR-43VQWX |
| | DVD Drives | | |
| | | Aptiva - E86/E8C DVD Frequently Asked Questions | DETR-3UDMHN |
| | | Aptiva - 2137/2138 Diagnostics - Factory installed storage devices | DETR-43VQWX |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hard Drives | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - 2137/2138 Diagnostics - Factory installed storage devices | DETR-43VQWX |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - 2138 - How to connect CD-ROM audio cable | MNOK-3UUS2L |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| 2139 | | |
| | Service Hints & Tips | | |
| | CD-ROM Drives | | |
| | | Aptiva - 2139/2153 Diagnostics - Factory installed storage devices | DETR-43WPTN |
| | | Aptiva - 2139/2153 Diagnostics - CD-ROM/DVD drive | DETR-43WQ8Z |
| | | Aptiva - 2139/2153 CD-ROM drive jumpers and connectors | DETR-3WFGRJ |
| | Diagnostics | | |
| | | Aptiva - 2139/2153 Diagnostics - Factory installed storage devices | DETR-43WPTN |
| | | Aptiva - 2139/2153 Diagnostics - CD-ROM/DVD drive | DETR-43WQ8Z |
| | Diskette Drives | | |
| | | Aptiva - 2139/2153 Diagnostics - Factory installed storage devices | DETR-43WPTN |
| | DVD Drives | | |
| | | Aptiva - 2139/2153 Diagnostics - Factory installed storage devices | DETR-43WPTN |
| | | Aptiva - Production Change - DVD-ROM drives | DETR-3ZFGZL |
| | | Aptiva - 2139/2153 Diagnostics - CD-ROM/DVD drive | DETR-43WQ8Z |
| | | Aptiva - Changing the DVD-ROM drive letter | DETR-3YVLEN |
| | | Aptiva - 2139/2153 DVD-ROM drive jumpers and connectors | DETR-3WFGJL |
| | | Aptiva - 2139 DVD Player does not play normally in 1024x768 resolution with 24 bit or 32 bit color palette | DETR-3VDN6N |
| | Hard Drives | | |
| | | Aptiva - 2139/2153 Diagnostics - Factory installed storage devices | DETR-43WPTN |
| | Hardware Installation/Configuration | | |
| | | Aptiva - 2139/2153 DVD-ROM drive jumpers and connectors | DETR-3WFGJL |
| | | Aptiva - 2139/2153 CD-ROM drive jumpers and connectors | DETR-3WFGRJ |
| | Jumper/Switch Settings | | |
| | | Aptiva - 2139/2153 DVD-ROM drive jumpers and connectors | DETR-3WFGJL |
| | | Aptiva - 2139/2153 CD-ROM drive jumpers and connectors | DETR-3WFGRJ |
| | Video | | |
| | | Aptiva - 2139 DVD Player does not play normally in 1024x768 resolution with 24 bit or 32 bit color palette | DETR-3VDN6N |
| 2140 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2140 - How to connect CD-ROM audio cable | MNOK-3UUPWY |
| | Cables | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2140 - How to connect CD-ROM audio cable | MNOK-3UUPWY |
| | CD-ROM Drives | | |
| | | Aptiva - 2140/2142 CD/DVD-ROM drive jumper settings | JWOE-3KXL37 |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2140 - How to connect CD-ROM audio cable | MNOK-3UUPWY |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - 2140/2142 Removals and replacements - 3.5-In., 5.25-In. cage | PMYS-3KYG2N |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Diagnostics | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | Diskette Drives | | |
| | | Aptiva - 2140/2142 Removals and replacements - 3.5-In., 5.25-In. cage | PMYS-3KYG2N |
| | DVD Drives | | |
| | | Aptiva - International Compatibility of DVD Media | PMYS-3SFTR3 |
| | | Aptiva - 2140/2142 CD/DVD-ROM drive jumper settings | JWOE-3KXL37 |
| | | Aptiva - Cannot play DVD movies after Hewlett Packard scanner installation | PMYS-3U9GX4 |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hard Drives | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - 2140/2142 Removals and replacements - 3.5-In., 5.25-In. cage | PMYS-3KYG2N |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - 2140/2142 CD/DVD-ROM drive jumper settings | JWOE-3KXL37 |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2140 - How to connect CD-ROM audio cable | MNOK-3UUPWY |
| | | Aptiva - 2140/2142 Removals and replacements - 3.5-In., 5.25-In. cage | PMYS-3KYG2N |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Jumper/Switch Settings | | |
| | | Aptiva - 2140/2142 CD/DVD-ROM drive jumper settings | JWOE-3KXL37 |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | ZIP Drives | | |
| | | Aptiva - 2140/2142 Removals and replacements - 3.5-In., 5.25-In. cage | PMYS-3KYG2N |
| 2142 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2142-S6H No sound when playing DVD movie | PMYS-3RLU3E |
| | | Aptiva - 2142 - How to connect CD-ROM audio cable | MNOK-3UUPP8 |
| | Cables | | |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2142 - How to connect CD-ROM audio cable | MNOK-3UUPP8 |
| | CD-ROM Drives | | |
| | | Aptiva - 2140/2142 CD/DVD-ROM drive jumper settings | JWOE-3KXL37 |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2142 - How to connect CD-ROM audio cable | MNOK-3UUPP8 |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - 2140/2142 Removals and replacements - 3.5-In., 5.25-In. cage | PMYS-3KYG2N |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Diagnostics | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | Diskette Drives | | |
| | | Aptiva - 2140/2142 Removals and replacements - 3.5-In., 5.25-In. cage | PMYS-3KYG2N |
| | DVD Drives | | |
| | | Aptiva - International Compatibility of DVD Media | PMYS-3SFTR3 |
| | | Aptiva - 2140/2142 CD/DVD-ROM drive jumper settings | JWOE-3KXL37 |
| | | Aptiva - 2142-S6H No sound when playing DVD movie | PMYS-3RLU3E |
| | | Aptiva - 2142 Re-installing the DVD drivers | GJAN-3T5RY4 |
| | | Aptiva - Cannot play DVD movies after Hewlett Packard scanner installation | PMYS-3U9GX4 |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hard Drives | | |
| | | Aptiva - 2140/2142 Removals and replacements - 3.5-In., 5.25-In. cage | PMYS-3KYG2N |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - 2140/2142 CD/DVD-ROM drive jumper settings | JWOE-3KXL37 |
| | | Aptiva - 2142 Re-installing the DVD drivers | GJAN-3T5RY4 |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2142 - How to connect CD-ROM audio cable | MNOK-3UUPP8 |
| | | Aptiva - 2140/2142 Removals and replacements - 3.5-In., 5.25-In. cage | PMYS-3KYG2N |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Jumper/Switch Settings | | |
| | | Aptiva - 2140/2142 CD/DVD-ROM drive jumper settings | JWOE-3KXL37 |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - 2142 Re-installing the DVD drivers | GJAN-3T5RY4 |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | ZIP Drives | | |
| | | Aptiva - 2140/2142 Removals and replacements - 3.5-In., 5.25-In. cage | PMYS-3KYG2N |
| 2144 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - 2144/2168/2176 Problems recording from a CD in Audio Station | GJAN-3T7MVB |
| | Cables | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | CD-ROM Drives | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - 2144/2168/2176 Problems recording from a CD in Audio Station | GJAN-3T7MVB |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | | Aptiva - Missing CD-ROM Drive on Windows 95 Service Level H and I Machines | DSET-3F6DLR |
| | Diagnostics | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | DVD Drives | | |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Entertainment Software | | |
| | | Aptiva - General Protection Fault in MPEG.DLL | DJON-3FWQNV |
| | | Aptiva - 2144/2168/2176 Problems recording from a CD in Audio Station | GJAN-3T7MVB |
| | Error Messages | | |
| | | Aptiva - General Protection Fault in MPEG.DLL | DJON-3FWQNV |
| | Hard Drives | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Mwave | | |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Video | | |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | | Aptiva - Missing CD-ROM Drive on Windows 95 Service Level H and I Machines | DSET-3F6DLR |
| 2153 | | |
| | Service Hints & Tips | | |
| | CD-ROM Drives | | |
| | | Aptiva - 2139/2153 Diagnostics - Factory installed storage devices | DETR-43WPTN |
| | | Aptiva - 2153 Hangs or errors copying files from CD-ROM Drive | DETR-3X3PXT |
| | | Aptiva - 2139/2153 Diagnostics - CD-ROM/DVD drive | DETR-43WQ8Z |
| | | Aptiva - 2139/2153 CD-ROM drive jumpers and connectors | DETR-3WFGRJ |
| | Diagnostics | | |
| | | Aptiva - 2139/2153 Diagnostics - Factory installed storage devices | DETR-43WPTN |
| | | Aptiva - 2139/2153 Diagnostics - CD-ROM/DVD drive | DETR-43WQ8Z |
| | Diskette Drives | | |
| | | Aptiva - 2139/2153 Diagnostics - Factory installed storage devices | DETR-43WPTN |
| | DVD Drives | | |
| | | Aptiva - 2139/2153 Diagnostics - Factory installed storage devices | DETR-43WPTN |
| | | Aptiva - 2139/2153 Diagnostics - CD-ROM/DVD drive | DETR-43WQ8Z |
| | | Aptiva - 2139/2153 DVD-ROM drive jumpers and connectors | DETR-3WFGJL |
| | Hard Drives | | |
| | | Aptiva - 2139/2153 Diagnostics - Factory installed storage devices | DETR-43WPTN |
| | Hardware Installation/Configuration | | |
| | | Aptiva - 2139/2153 DVD-ROM drive jumpers and connectors | DETR-3WFGJL |
| | | Aptiva - 2139/2153 CD-ROM drive jumpers and connectors | DETR-3WFGRJ |
| | Jumper/Switch Settings | | |
| | | Aptiva - 2139/2153 DVD-ROM drive jumpers and connectors | DETR-3WFGJL |
| | | Aptiva - 2139/2153 CD-ROM drive jumpers and connectors | DETR-3WFGRJ |
| | Lock-up/Hang | | |
| | | Aptiva - 2153 Hangs or errors copying files from CD-ROM Drive | DETR-3X3PXT |
| 2155 | | |
| | Service Hints & Tips | | |
| | CD-ROM Drives | | |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| | Hardware Installation/Configuration | | |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| 2159 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2159 - How to connect CD-ROM audio cable (non-Mwave) | MNOK-3UULUK |
| | | Aptiva - 2159 - How to connect CD-ROM audio cable (Mwave) | MNOK-3UULNU |
| | Cables | | |
| | | Aptiva - 2159 - How to connect CD-ROM audio cable (non-Mwave) | MNOK-3UULUK |
| | | Aptiva - 2159 - How to connect CD-ROM audio cable (Mwave) | MNOK-3UULNU |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | CD-ROM Drives | | |
| | | Aptiva - 2159 - How to connect CD-ROM audio cable (non-Mwave) | MNOK-3UULUK |
| | | Aptiva - 2159 - How to connect CD-ROM audio cable (Mwave) | MNOK-3UULNU |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Diagnostics | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | DVD Drives | | |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hard Drives | | |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - 2159 - How to connect CD-ROM audio cable (non-Mwave) | MNOK-3UULUK |
| | | Aptiva - 2159 - How to connect CD-ROM audio cable (Mwave) | MNOK-3UULNU |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Video | | |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| 2161 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2161 - How to connect CD-ROM audio cable | MNOK-3UUQC7 |
| | Cables | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2161 - How to connect CD-ROM audio cable | MNOK-3UUQC7 |
| | CD-ROM Drives | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2161 - How to connect CD-ROM audio cable | MNOK-3UUQC7 |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2161/2162 CD-ROM drive jumper settings | COBN-3G5EGW |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Diagnostics | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | DVD Drives | | |
| | | Aptiva - International Compatibility of DVD Media | PMYS-3SFTR3 |
| | | Aptiva - 2161-C3D Reinstalling the DVD drivers | GJAN-3T4SP5 |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hard Drives | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2161-C3D Reinstalling the DVD drivers | GJAN-3T4SP5 |
| | | Aptiva - 2161 - How to connect CD-ROM audio cable | MNOK-3UUQC7 |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2161/2162 CD-ROM drive jumper settings | COBN-3G5EGW |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Jumper/Switch Settings | | |
| | | Aptiva - 2161/2162 CD-ROM drive jumper settings | COBN-3G5EGW |
| | Lock-up/Hang | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | Retain | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Video | | |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | Windows NT | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| 2162 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2162 - How to connect CD-ROM audio cable | MNOK-3UUMGP |
| | Cables | | |
| | | Aptiva - 2162 - How to connect CD-ROM audio cable | MNOK-3UUMGP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | CD-ROM Drives | | |
| | | Aptiva - 2162 - How to connect CD-ROM audio cable | MNOK-3UUMGP |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2161/2162 CD-ROM drive jumper settings | COBN-3G5EGW |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Diagnostics | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | DVD Drives | | |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hard Drives | | |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - 2162 - How to connect CD-ROM audio cable | MNOK-3UUMGP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2161/2162 CD-ROM drive jumper settings | COBN-3G5EGW |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Jumper/Switch Settings | | |
| | | Aptiva - 2161/2162 CD-ROM drive jumper settings | COBN-3G5EGW |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Video | | |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| 2168 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - 2144/2168/2176 Problems recording from a CD in Audio Station | GJAN-3T7MVB |
| | Cables | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | CD-ROM Drives | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - (US Only) Four CD Changer | GSMH-386HAT |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - 2168 (Service Level I) CD-ROM changer emergency disc removal | MNOK-42QQRT |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - 2144/2168/2176 Problems recording from a CD in Audio Station | GJAN-3T7MVB |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | | Aptiva - Missing CD-ROM Drive on Windows 95 Service Level H and I Machines | DSET-3F6DLR |
| | Diagnostics | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | DVD Drives | | |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Entertainment Software | | |
| | | Aptiva - General Protection Fault in MPEG.DLL | DJON-3FWQNV |
| | | Aptiva - 2144/2168/2176 Problems recording from a CD in Audio Station | GJAN-3T7MVB |
| | Error Messages | | |
| | | Aptiva - General Protection Fault in MPEG.DLL | DJON-3FWQNV |
| | Hard Drives | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - 2168 (Service Level I) CD-ROM changer emergency disc removal | MNOK-42QQRT |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | DETR-3UEN5M |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Mwave | | |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Video | | |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | | Aptiva - Missing CD-ROM Drive on Windows 95 Service Level H and I Machines | DSET-3F6DLR |
| 2176 | | |
| | Service Hints & Tips | | |
| | Audio | | |
| | | Aptiva - 2176-C6V - How to connect CD-ROM audio cable | MNOK-3UUTAF |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - 2176-C6Z - How to connect CD-ROM audio cable | MNOK-3UUR94 |
| | Cables | | |
| | | Aptiva - 2176-C6V - How to connect CD-ROM audio cable | MNOK-3UUTAF |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - 2176-C6Z - How to connect CD-ROM audio cable | MNOK-3UUR94 |
| | CD-ROM Drives | | |
| | | Aptiva - 2176-C6V - How to connect CD-ROM audio cable | MNOK-3UUTAF |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - Supported CD media types | MNOK-3TAK7G |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | | Aptiva - 2176-C6Z - How to connect CD-ROM audio cable | MNOK-3UUR94 |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Diagnostics | | |
| | | Aptiva - How to test CD-ROM drive ability to read data CDs | PMYS-3L5VFJ |
| | DVD Drives | | |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Entertainment Software | | |
| | | Aptiva - General Protection Fault in MPEG.DLL | DJON-3FWQNV |
| | Error Messages | | |
| | | Aptiva - General Protection Fault in MPEG.DLL | DJON-3FWQNV |
| | Hard Drives | | |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Hardware Installation/Configuration | | |
| | | Aptiva - 2176-C6V - How to connect CD-ROM audio cable | MNOK-3UUTAF |
| | | Aptiva - How to swap data cables between CD-ROM and hard drive | BMOE-3Q8LMP |
| | | Aptiva - How to reseat data and power cables for CD-ROM | MNOK-3QJMBX |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - How to tighten CD-ROM drive screws | MNOK-3T5TBR |
| | | Aptiva - 2176-C6Z - How to connect CD-ROM audio cable | MNOK-3UUR94 |
| | | Aptiva - How to set jumpers for two devices on a single IDE controller | MNOK-3T4NRU |
| | Mwave | | |
| | | Aptiva - 2134/2144/2168/2176 - How to connect CD-ROM audio cable | MNOK-3UUR49 |
| | | Aptiva - 2176-C6Z - How to connect CD-ROM audio cable | MNOK-3UUR94 |
| | Software Installation/Configuration | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | Video | | |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| | Windows 95 | | |
| | | Aptiva - How to load CD-ROM drivers from the DOS startup files | BMOE-3Q8MB7 |
| | | Aptiva - How the CD-ROM drive should be recognized in the Device Manager | BMOE-3Q8M7W |
| | | Aptiva - Can not read CD-I or Green Book CD-ROMs | DSET-3F4LVJ |
| 2620 | | |
| | Parts Information | | |
| | | TP 360,750,755 - HDD/CD-Rom/FDD Options | TJEK-3QHLQV |
| 2626 | | |
| | System Support Disks | | |
| | Audio | | |
| | | TP 390,172x - Audio Features Diskette for OS/2 Warp | LWIK-3ZSQJ6 |
| | | TP 390,172x - Audio Features Diskette for Windows NT 4.0 | LWIK-3ZSQXL |
| | Country Specific Files | | |
| | | TP 390,172x - Audio Features Diskette for OS/2 Warp | LWIK-3ZSQJ6 |
| | | TP 390,172x - Windows 95/98 Supplement File Diskette | LWIK-3ZSTFK |
| | | TP 390,172x - APM Support Diskette for Windows NT | LWIK-3ZSL36 |
| | Modems | | |
| | | TP 390,172x - Modem Ring Diskette for Windows 95/98 | DSHY-426QAL |
| | OS/2 | | |
| | | TP 390,172x - Audio Features Diskette for OS/2 Warp | LWIK-3ZSQJ6 |
| | Software | | |
| | | TP 390,172x - Windows 95/98 Supplement File Diskette | LWIK-3ZSTFK |
| | Utility | | |
| | | TP 390,172x - APM Support Diskette for Windows NT | LWIK-3ZSL36 |
| | Windows 95 | | |
| | | TP 390,172x - Modem Ring Diskette for Windows 95/98 | DSHY-426QAL |
| | | TP 390,172x - Windows 95/98 Supplement File Diskette | LWIK-3ZSTFK |
| | Windows 98 | | |
| | | TP 390,172x - Modem Ring Diskette for Windows 95/98 | DSHY-426QAL |
| | Windows NT | | |
| | | TP 390,172x - APM Support Diskette for Windows NT | LWIK-3ZSL36 |
| | | TP 390,172x - Audio Features Diskette for Windows NT 4.0 | LWIK-3ZSQXL |
| 2627 | | |
| | System Support Disks | | |
| | Audio | | |
| | | TP 390,172x - Audio Features Diskette for OS/2 Warp | LWIK-3ZSQJ6 |
| | | TP 390,172x - Audio Features Diskette for Windows NT 4.0 | LWIK-3ZSQXL |
| | Country Specific Files | | |
| | | TP 390,172x - Audio Features Diskette for OS/2 Warp | LWIK-3ZSQJ6 |
| | | TP 390,172x - Windows 95/98 Supplement File Diskette | LWIK-3ZSTFK |
| | | TP 390,172x - APM Support Diskette for Windows NT | LWIK-3ZSL36 |
| | Modems | | |
| | | TP 390,172x - Modem Ring Diskette for Windows 95/98 | DSHY-426QAL |
| | OS/2 | | |
| | | TP 390,172x - Audio Features Diskette for OS/2 Warp | LWIK-3ZSQJ6 |
| | Software | | |
| | | TP 390,172x - Windows 95/98 Supplement File Diskette | LWIK-3ZSTFK |
| | Utility | | |
| | | TP 390,172x - APM Support Diskette for Windows NT | LWIK-3ZSL36 |
| | Windows 95 | | |
| | | TP 390,172x - Modem Ring Diskette for Windows 95/98 | DSHY-426QAL |
| | | TP 390,172x - Windows 95/98 Supplement File Diskette | LWIK-3ZSTFK |
| | Windows 98 | | |
| | | TP 390,172x - Modem Ring Diskette for Windows 95/98 | DSHY-426QAL |
| | Windows NT | | |
| | | TP 390,172x - APM Support Diskette for Windows NT | LWIK-3ZSL36 |
| | | TP 390,172x - Audio Features Diskette for Windows NT 4.0 | LWIK-3ZSQXL |
| 2630 | | |
| | Parts Information | | |
| | | TP 701 - HDD/CD-Rom/FDD Options | TJEK-3QHVCN |
| 3547 | | |
| | Parts Information | | |
| | | TP SelectaDock I - Options List | TJEK-3QQKY3 |
| | | TP SelectaDock II - Options List | TJEK-3QQL2M |
| 6050 | | |
| | System Support Disks | | |
| | Audio | | |
| | | PowerPS - Win NT 4.0 Neta Sound Drivers | GCOR-3FYEDW |
| 6070 | | |
| | System Support Disks | | |
| | Audio | | |
| | | PowerPS - Win NT 4.0 Neta Sound Drivers | GCOR-3FYEDW |
| 6272 | | |
| | Service Hints & Tips | | |
| | CD-ROM Drives | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | Lock-up/Hang | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | Printers | | |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| | Retain | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| | Windows 95 | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| | Windows NT | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| 6282 | | |
| | Service Hints & Tips | | |
| | CD-ROM Drives | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | Lock-up/Hang | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | Printers | | |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| | Retain | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| | Windows 95 | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| | Windows NT | | |
| | | CrossBrand - 16X CD hangs or loads 2 copies of application | MCGN-3HKMPP |
| 6562 | | |
| | Service Hints & Tips | | |
| | Printers | | |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| | Retain | | |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| | Windows 95 | | |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| 6576 | | |
| | Service Hints & Tips | | |
| | General Information | | |
| | | IBM PC330/PC350 (Type 6576, 6586) - Current driver levels | JBAR-3RJNY2 |
| | Printers | | |
| | | IBM PC330/PC350 - Lexmark 2380 printer continuously resets | RMIE-3JJB2Z |
| | System Support Disks | | |
| | OS/2 | | |
| | | IBM PC - PRIN01 - PRINT01.SYS for OS/2 2.11 | COBN-3EMJTG |
| | Printers | | |
| | | IBM PC - PRIN01 - PRINT01.SYS for OS/2 2.11 | COBN-3EMJTG |
| | Video | | |
| | | IBM PC - Z03T11A - S3 Trio 64/64v+ video for Windows 95 | GCOR-38PG78 |
| | Windows 95 | | |
| | | IBM PC - Z03T11A - S3 Trio 64/64v+ video for Windows 95 | GCOR-38PG78 |
| 6577 | | |
| | Service Hints & Tips | | |
| | Printers | | |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| | Retain | | |
| | | IBM PC - Problems printing from DOS window in Windows 95 | MCGN-3LQJPX |
| | Windows 95 | | |
| [Next Page] |