Part Design  

Chamfer    

Description

Describes a chamfer.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

Angle
Defines the chamfer angle value.

Length1
Defines the length from the selected edge on the first face.

Length2
Defines the length from the selected edge on the second face.

CounterboredHole   

Description

Describes the mechanical feature of Hole type you create when you click the icon in the Part Design workbench. For more information, see the Part Design User's Guide.

Inheritance path

 Standard - Feature > Standard - Visualizable -> MechanicalModeler - GeometricFeature > MechanicaModeler - Body > MechanicalModeler > MechanicalFeature > PartDesign - Hole

CounterboreDepth
Defines the counterbore depth

CounterboreDiameter
Defines the counterbore diameter 

CounterdrilledHole   

Description

Describes the mechanical feature of Hole type you create when you click the icon in the Part Design workbench. For more information, see the Part Design User's Guide.

Inheritance path 

Standard - Feature > Standard - Visualizable -> MechanicalModeler - GeometricFeature > MechanicaModeler - Body > MechanicalModeler - MechanicalFeature > PartDesign - Hole

Attributes

CounterdrillAngle
Defines the counterdrilled hole angle

CounterdrillDepth
Defines the counterdrilled hole depth

CounterdrillDiameter
Defines the counterdrilled hole diameter 

CountersunkHole   

Description

Describes the mechanical feature of Hole type you create when you click the icon in the Part Design workbench. For more information, refer o the Part Design User's Guide. 

Inheritance path 

Standard - Feature > Standard - Visualizable -> MechanicalModeler - GeometricFeature > MechanicaModeler - Body > MechanicalModeler - MechanicalFeature > PartDesign - Hole

CountersinkAngle
Defines the countersink angle

CountersinkDepth
Defines the countersink depth

CountersinkDiameter
Defines the countersink diameter

Draft    

Description

Describes a draft.

Inheritance path

Standard - Feature > Standard - Visualizable > > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

Angle
Defines the draft angle value

Groove    

Description

Describes a groove.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

EndAngle
Defines the angle value for one direction

MergeEnd
Defines how the pad is trimmed to existing material

NeutralFiber
Defines how material is equally added to both sides of the profile

StartAngle
Defines the angle value for the second direction

Thickness1
Defines the first thickness value

Thickness2
Defines the second thickness value

ThinMode
Defines if thickness is added

Hole   

Describes the mechanical feature of Hole type you create when you click the icon in the Part Design workbench. For more information, refer o the Part Design User's Guide. 

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler - MechanicalFeature

BottomAngle
Defines the bottom angle

BottomType
Defines the hole bottom type (v-bottom or flat)

Depth
Defines the hole depth 

Diameter 
Defines the hole diameter

DiameterThread
Defines the hole thread 

HoleType
Defines the hole type (Simple, Tapered, Counterbored, Countersunk, Counterdrilled) 

LimitType
Defines the hole limit (Blind, Up to Next, Up to Last, Up to Plane, Up to Surface)

Pitch
Defines the distance between each crest of the thread

TapSide
Defines the side or the thread (right or left) 

Threaded
Defines the hole as threaded 

ThreadingDepth
Defines the thread depth

Example

(for all) H:Hole
/*Displays the Hole activity and diameter */
Message("# activity: # - diameter: #", H > Name(), H.Activity, H.Diameter)

Pad    

Description

Describes a pad.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

FirstLength
Defines the first length value

MergeEnd
Defines how the pad is trimmed to existing material

NeutralFiber
Defines how material is equally added to both sides of the profile

SecondLength
Defines the second length value

Thickness1
Defines the first thickness value

Thickness2
Defines the second thickness value

ThinMode
Defines if thickness is added

Pocket    

Description

Describes a pocket.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

FirstLength
Defines the first length value

MergeEnd
Defines how the pad is trimmed to existing material

NeutralFiber
Defines how material is equally added to both sides of the profile

SecondLength
Defines the second length value

Thickness1
Defines the first thickness value

Thickness2
Defines the second thickness value

ThinMode
Defines if thickness is added

Rib    

Description

Describes a rib.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

MergeEnd
Defines how the pad is trimmed to existing material

NeutralFiber
Defines how material is equally added to both sides of the profile

Thickness1
Defines the first thickness value

Thickness2
Defines the second thickness value

ThinMode
Defines if thickness is added

Shaft    

Description

Describes a shaft.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

EndAngle
Defines the angle value for one direction

MergeEnd
Defines how the pad is trimmed to existing material

NeutralFiber
Defines how material is equally added to both sides of the profile

StartAngle
Defines the angle value for the second direction

Thickness1
Defines the first thickness value

Thickness2
Defines the second thickness value

ThinMode
Defines if thickness is added

Shell    

Description

Describes a shell.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

DefaultInsideThickness
Defines the inside thickness value

DefaultOutsideThickness
Defines the outside thickness value

Slot    

Description

Describes a slot.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

MergeEnd
Defines how the pad is trimmed to existing material

NeutralFiber
Defines how material is equally added to both sides of the profile

Thickness1
Defines the first thickness value

Thickness2
Defines the second thickness value

ThinMode
Defines if thickness is added

Stiffener    

Description

Describes a stiffener.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

NeutralFiber
Defines how material is equally added to both sides of the profile

StiffenerMode
Defines the stiffener creation mode

Thickness1
Defines the first thickness value

Thickness2
Defines the second thickness value

TaperedHole   

Description

Describes the mechanical feature of Hole type you create when you click the icon in the Part Design workbench. For more information, refer o the Part Design User's Guide. 

Inheritance path 

Standard - Feature > Standard - Visualizable -> MechanicalModeler - GeometricFeature > MechanicalModeler - MechanicalFeature > PartDesign - Hole

TaperAngle
Defines the taper angle

Thickness    

Description

Describes a thickness.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

DefaultThickness
Defines the default thickness value.

ThickSurface    

Description

Describes a thicksurface.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler - MechanicalFeature

Attributes

BotOffset
Defines the first offset value.

TopOffset
Defines the second offset value.

Thread    

Description

Describes a thread.

Inheritance path

Standard - Feature > Standard - Visualizable > MechanicalModeler > GeometricFeature > MechanicalModeler > MechanicalFeature

Attributes

Depth
Defines the thread depth value.

Diameter
Defines the thread diameter value.

Pitch
Defines the distance between each crest.

ThreadSide
Defines the side of the thread (right or left)