System Hangs at c33 with an LFT

System Hangs at c33 with an LFT.

Problem

System hangs at c33 with an LFT.

Solution

c33 is configuring the console as a tty. Typcially this occurs because the console is configured as a tty but has no tty. In this situation, when booting into service mode and executing an lscons, the console will show up as an lft. To verify that this is the case, enter smitty chcons. PATHNAME of console will be set to /dev/tty0. Change the pathname to /dev/lft0 and reboot your system.

System Hangs at c33 with an LFT: ITEM: FAX
Dated: 2000/10/24~00:00 Category: gph
This HTML file was generated 2001/03/08~16:05:52
Comments or suggestions? Contact us