Installation Guide and Reference

Perform a Migration Base Operating System Installation from CD

Using this scenario, you can migrate a system from AIX 4.3.3 (or earlier) to AIX 5.2. In this scenario, you will do the following:

Perform a migration installation of AIX 4.3.3 to AIX 5.2
Use English as the primary language
Use the default options in the Advanced Options menu

If you are overwriting an existing system, gather the TCP/IP information before you begin this scenario.

Attention: This procedure requires shutting down and reinstalling the base operating system. Whenever you reinstall any operating system, schedule your downtime when it least impacts your workload to protect yourself from a possible loss of data or functionality. Before you perform a migration installation, ensure you have reliable backups of your data and any customized applications or volume groups. For instructions on how to create a system backup, refer to Creating System Backups.

The following steps show you how to use the system's built-in CD-ROM device to perform a migration base operating system installation.

Step 1. Prepare for the Migration

Before starting the migration, complete the following prerequisites:

Ensure that the root user has a primary authentication method of SYSTEM. You can check this condition by typing the following command:
```
# lsuser -a auth1 root
```
If needed, change the value by typing the following command:
```
# chuser auth1=SYSTEM root
```
Before you begin the installation, other users who have access to your system must be logged off.
Verify that your applications will run on AIX 5.2. Also, check if your applications are binary-compatible with AIX 5.2. If your system is an application server, verify that there are no licensing issues. Refer to your application documentation or provider to verify on which levels of AIX your applications are supported and licensed. You can also check the AIX application availability guide at the following Web address: http://www-1.ibm.com/servers/aix/products/ibmsw/list/
Verify that all currently installed software is correctly entered in the Software Vital Product Database (SWVPD), by using the lppchk command. To verify that all filesets have all required requisites and are completely installed, type the following:
```
# lppchk -v
```
Check that your hardware microcode is up-to-date.
All requisite hardware, including any external devices (such as tape drives or CD/DVD-ROM drives), must be physically connected and powered on. If you need further information, refer to the hardware documentation that accompanied your system.
Use the errpt command to generate an error report from entries in the system error log. To display a complete detailed report, type the following:
```
# errpt -a
```
There must be adequate disk space and memory available. AIX 5.2 requires 128 MB of memory and 2.2 GB of physical disk space. For additional release information, see the AIX 5.2 Release Notes.
Make a backup copy of your system software and data. For instructions on how to create a system backup, refer to Creating System Backups.

Step 2. Boot from the AIX Product CD

If they are not already on, turn on your attached devices.
Insert the AIX Volume 1 CD into the CD-ROM device.
Reboot the system by typing the following command:
```
# shutdown -r
```
When the system beeps twice, press F5 on the keyboard (or 5 on an ASCII terminal). If you have a graphics display, you will see the keyboard icon on the screen when the beeps occur. If you have an ASCII terminal (also called a tty terminal), you will see the word keyboard when the beeps occur.
Note

If your system does not boot using the F5 key (or the 5 key on an ASCII terminal), refer to your hardware documentation for information about how to boot your system from an AIX product CD.
Select the system console by pressing F1 (or 1 on an ASCII terminal) and press Enter.
Select the English language for the BOS Installation menus by typing a 1 at the Choice field and press Enter. The Welcome to Base Operating System Installation and Maintenance menu opens.

Type 2 to select 2 Change/Show Installation Settings and Install in the Choice field and press Enter.

                      Welcome to Base Operating System
                      Installation and Maintenance

Type the number of your choice and press Enter.  Choice is indicated by >>>.

    1 Start Install Now with Default Settings 

    2 Change/Show Installation Settings and Install

    3 Start Maintenance Mode for System Recovery


    88  Help ?
    99  Previous Menu
>>> Choice [1]: 2

Step 3. Verify Migration Installation Settings and Begin Installation

Verify that migration is the method of installation. If migration is not the method of installation, select it now. Select the disk or disks you want to install.
```
    1  System Settings:
         Method of Installation.............Migration
         Disk Where You Want to Install.....hdisk0
```
Select Primary Language Environment Settings (AFTER Install).
Type 3 and press Enter to select More Options. To use the Help menu to learn more about the options available during a migration installation, type 88 and press Enter in the Installation Options menu. For more information about the installation options available in AIX 5.2, see Installation Options.
Verify the selections in the Migration Installation Summary screen and press Enter.

When the Migration Confirmation menu displays, follow the menu instructions to list system information or continue with the migration by typing 0 and pressing Enter.

                                   Migration Confirmation

  Either type 0 and press Enter to continue the installation, or type the
  number of your choice and press Enter.

    1  List the saved Base System configuration files which will not be
       merged into the system.  These files are saved in /tmp/bos.
    2  List the filesets which will be removed and not replaced.
    3  List directories which will have all current contents removed.
    4  Reboot without migrating.

    Acceptance of license agreements is required before using system.
    You will be prompted to accept after the system reboots.

>>> 0  Continue with the migration.
   88  Help ?

+---------------------------------------------------------------------------
  WARNING: Selected files, directories, and filesets (installable options)
    from the Base System will be removed.  Choose 2 or 3 for more information.


>>> Choice[0]:

Step 4. Verify System Configuration after Installation

After the migration is complete, the system will reboot. Verify the system configuration, as follows:

On systems with a graphics display, after a migration installation, the Configuration Assistant opens. On systems with an ASCII display, after a migration installation, the Installation Assistant opens.
For more information on the Configuration Assistant or the Installation Assistant, see Configuring the Operating System.
Select the Accept Licenses option to accept the electronic licenses for the operating system.
Verify the administrator (root user) password and network communications (TCP/IP) information.
Use any other options at this time. You can return to the Configuration Assistant or the Installation Assistant by typing configassist or smitty assist at the command line.
Select Exit the Configuration Assistant and select Next. Or, press F10 (or ESC+0) to exit the Installation Assistant.
If you are in the Configuration Assistant, select Finish now, and do not start Configuration Assistant when restarting AIX and select Finish.

When the login prompt displays, log in as the root user to perform system administration tasks.