[ Bottom of Page | Previous Page | Next Page | Contents | Index | Library Home |
Legal |
Search ]
System Management Guide:
Operating System and Devices
Displaying PCI Hot-Plug Slot Information
Before you add, remove, or replace a hot-plug adapter, you can display the following information about the PCI hot-plug slots in a machine:
- A list of all the PCI hot-plug slots in the machine
- Whether a slot is available or empty
- Slots that are currently in use
- The characteristics of a specific slot such as slot name, description, connector type, and the attached device name
You can complete these tasks with Web-based System Manager. You can also use SMIT or system commands. To perform these tasks, you must log in as root user.
For additional information, see PCI Hot-Plug Management in the AIX 5L Version 5.2 System Management Concepts: Operating System and Devices.
SMIT Fastpath Procedure
- Type smit devdrpci at the system prompt, then press Enter.
- Use the SMIT dialogs to complete the task.
To obtain additional information for completing the task, you can select the F1 Help key in the SMIT dialogs.
Commands Procedure
You can use the following commands to display information about hot-plug slots and connected devices:
- The lsslot command displays a list of all the PCI hot-plug slots and their characteristics. For information about using this command, see lsslot in the AIX 5L Version 5.2 Commands Reference, Volume 3.
- The lsdev command displays the current state of all the devices installed in your system. For information about using this command, see lsdev in the AIX 5L Version 5.2 Commands Reference, Volume 3.
[ Top of Page | Previous Page | Next Page | Contents | Index | Library Home |
Legal |
Search ]