Technical Reference: Base Operating System and Extensions , Volume 2

srcsbuf Subroutine

Purpose

Gets status for a subserver or a subsystem and returns status text to be printed.

Library

System Resource Controller Library (libsrc.a)

Syntax

#include <spc.h>

intsrcsbuf(Host,Type,SubsystemName, SubserverObject,SubsystemPID, StatusType,StatusFrom,StatusText,Continued)

char * Host, * SubsystemName;

char * SubserverObject, ** StatusText;

short Type, StatusType; int SubsystemPID, StatusFrom, * Continued;

Description

The srcsbuf subroutine gets the status of a subserver or subsystem and returns printable text for the status in the address pointed to by the StatusText parameter.

When the StatusType parameter is SHORTSTAT and the Type parameter is SUBSYSTEM, the srcstat subroutine is called to get the status of one or more subsystems. When the StatusType parameter is LONGSTAT and the Type parameter is SUBSYSTEM, the srcrsqt subroutine is called to get the long status of one subsystem. When the Type parameter is not SUBSYSTEM, the srcsrqt subroutine is called to get the long or short status of a subserver.

Parameters

Host	Specifies the foreign host on which this status action is requested. If the host is null, the status request is sent to the System Resource Controller (SRC) on the local host. The local user must be running as "root". The remote system must be configured to accept remote System Resource Controller requests. That is, the srcmstr daemon (see /etc/inittab) must be started with the -r flag and the /etc/hosts.equiv or .rhosts file must be configured to allow remote requests.
Type	Specifies whether the status request applies to the subsystem or subserver. If the Type parameter is set to SUBSYSTEM, the status request is for a subsystem. If not, the status request is for a subserver and the Type parameter is a subserver code point.
SubsystemName	Specifies the name of the subsystem on which to get status. To get the status of all subsystems, use the SRCALLSUBSYS constant. To get the status of a group of subsystems, the SubsystemName parameter must start with the SRCGROUP constant, followed by the name of the group for which you want status appended. If you specify a null SubsystemName parameter, you must specify a SubsystemPID parameter.
SubserverObject	Specifies a subserver object. The SubserverObject parameter modifies the Type parameter. The SubserverObject parameter is ignored if the Type parameter is set to SUBSYSTEM. The use of the SubserverObject parameter is determined by the subsystem and the caller. This parameter will be placed in the `objname` field of the subreq structure that is passed to the subsystem.
SubsystemPID	Specifies the process ID of the subsystem on which to get status, as returned by the srcstrt subroutine. You must specify the SubsystemPID parameter if multiple instances of the subsystem are active and you request a long subsystem status or subserver status. If you specify a null SubsystemPID parameter, you must specify a SubsystemName parameter.
StatusType	Specifies LONGSTAT for long status or SHORTSTAT for short status.
StatusFrom	Specifies whether status errors and messages are to be printed to standard output or just returned to the caller. When the StatusFrom parameter is SSHELL, the errors are printed to standard output.
StatusText	Allocates memory for the printable text and sets the StatusText parameter to point to this memory. After it prints the text, the calling process must free the memory allocated for this buffer.
Continued	Specifies whether this call to the srcsbuf subroutine is a continuation of a status request. If the Continued parameter is set to NEWREQUEST, a request for status is sent and the srcsbuf subroutine then waits for another. On return, the srcsbuf subroutine is updated to the new continuation indicator from the reply packet and the Continued parameter is set to END or STATCONTINUED by the subsystem. If the Continued parameter is set to something other than END, this field must remain equal to that value; otherwise, this function will not be able to receive any more packets for the original status request. The calling process should not set the value of the Continued parameter to a value other than NEWREQUEST. The Continued parameter should not be changed while more responses are expected.

Return Values

If the srcsbuf subroutine succeeds, it returns the size (in bytes) of printable text pointed to by the StatusText parameter.

Error Codes

The srcsbuf subroutine fails if one or more of the following are true:

SRC_BADSOCK	The request could not be passed to the subsystem because of some socket failure.
SRC_CONT	The subsystem uses signals. The request cannot complete.
SRC_DMNA	The SRC daemon is not active.
SRC_INET_AUTHORIZED_HOST	The local host is not in the remote /etc/hosts.equiv file.
SRC_INET_INVALID_HOST	On the remote host, the local host is not known.
SRC_INVALID_USER	The user is not root or group system.
SRC_MMRY	An SRC component could not allocate the memory it needs.
SRC_NOCONTINUE	The Continued parameter was not set to NEWREQUEST, and no continuation is currently active.
SRC_NORPLY	The request timed out waiting for a response.
SRC_NSVR	The subsystem is not active.
SRC_SOCK	There is a problem with SRC socket communications.
SRC_STPG	The request was not passed to the subsystem. The subsystem is stopping.
SRC_UDP	The SRC port is not defined in the /etc/services file.
SRC_UHOST	The foreign host is not known.
SRC_WICH	There are multiple instances of the subsystem active.

Examples

To get the status of a subsystem, enter:

char *status;
int continued=NEWREQUEST;
int rc;
 
do {
  rc=srcsbuf("MaryC", SUBSYSTEM, "srctest", "", 0,
     SHORTSTAT, SSHELL, &status, continued);
   if (status!=0)
    {
        printf(status);
        free(status);
        status=0;
    }
}  while (rc>0);

This gets short status of the srctest subsystem on the MaryC machine and prints the formatted status to standard output.

To get the status of a subserver, enter:
```
char *status;
int continued=NEWREQUEST;
int rc;
 
do {
  rc=srcsbuf("", 12345, "srctest", "", 0,
     LONGSTAT, SSHELL, &status, continued);
   if (status!=0)
    {
        printf(status);
        free(status);
        status=0;
    }
}  while (rc>0);
  
```
This gets long status for a specific subserver belonging to subsystem srctest. The subserver is the one having code point 12345. This request is processed on the local machine. The formatted status is printed to standard output.

Implementation Specifics

This subroutine is part of Base Operating System (BOS) Runtime.

Files

/etc/services	Defines sockets and protocols used for Internet services.
/dev/SRC	Specifies the AF_UNIX socket file.
/dev/.SRC-unix	Specifies the location for temporary socket files.

Related Information

The srcrrqs (srcrrqs Subroutine) subroutine, srcsrpy (srcsrpy Subroutine) subroutine, srcsrqt (srcsrqt Subroutine) subroutine, srcstat (srcstat Subroutine) subroutine, srcstathdr (srcstathdr Subroutine) subroutine, srcstattxt (srcstattxt Subroutine) subroutine, srcstop (srcstop Subroutine) subroutine, srcstrt (srcstrt Subroutine) subroutine.

List of SRC Subroutines in AIX 5L Version 5.1 General Programming Concepts: Writing and Debugging Programs.

Programming Subsystem Communication with the SRC in AIX 5L Version 5.1 General Programming Concepts: Writing and Debugging Programs.

System Resource Controller (SRC) Overview for Programmers in AIX 5L Version 5.1 General Programming Concepts: Writing and Debugging Programs.