Used by the x25_call and x25_call_accept subroutines to pass facilities information.
#define X25FLG_RPOA 0x00000001 #define X25FLG_PSIZ 0x00000002 #define X25FLG_WSIZ 0x00000004 #define X25FLG_TCLS 0x00000008 #define X25FLG_REV_CHRG 0x00000010 #define X25FLG_FASTSEL 0x000000 20 #define X25FLG_FASTSEL_RSP 0x00000040 #define X25FLG_CUG 0x00000080 #define X25FLG_OA_CUG 0x0 0000100 #define X25FLG_BI_CUG 0x0 0000200 #define X25FLG_NUI_DATA 0x00000400 #define X25FLG_CI_SEG_CNT 0x00000800 #define X25FLG_CI_MON_UNT 0x00001000 #define X25FLG_CI_CALL_DUR 0x00002000 #define X25FLG_CI_REQUEST 0x00004000 #define X25FLG_CLAMN 0x00008000 #define X25FLG_CALL_REDR 0x00010000 #define X25FLG_TRAN_DEL 0x00020000 #define X25FLG_CALLING_ADDR_EXT 0x00040000 #define X25FLG_CALLED_ADDR_EXT 0x00080000 #define X25FLG_MIN_TCLS 0x00100000 #define X25FLG_END_TO_END_DEL 0x00200000 #define X25FLG_EXP_DATA 0x00400000 #define X25FLG_FACEXT 0x0 0800000
struct cb_fac_struct
{
u_long flags ;
unsigned fac_ext_len;
u_char *fac_ext; /*
for non-X.25 facilities */
u_char psiz_clg;
u_char psiz_cld;
u_char wsiz_clg;
u_char wsiz_cld;
u_char tcls_clg;
u_char tcls_cld;
unsigned rpoa_id_len;
ushort *rpoa_id;
ushort cug_id;
unsigned nui_data_len;
u_char *nui_data;
unsigned ci_seg_cnt_len;
u_char *ci_seg_cnt;
unsigned ci_mon_unt_len;
u_char *ci_mon_unt;
unsigned ci_cal_dur_len;
u_char *ci_cal_dur;
u_char call_redr_addr[X25_MAX_ASCII_ADDRESS_LENGTH];
u_char call_redr_reason;
short tran_del;
u_char calling_addr_ext_use;
char calling_addr_ext[X25_MAX_EXT_ADDR_DIGITS+1];
u_char called_addr_ext_use;
char called_addr_ext[X25_MAX_EXT_ADDR_DIGITS+1];
u_char clamn;
u_char min_tcls_clg;
u_char min_tcls_cld;
unsigned end_to_end_del_len;
ushort end_to_end_del[3];
};
Note: The example shows how to code the cb_fac_struct structure.
| X25FLG_RPOA | Recognized private operating agency selection required ( rpoa_id). |
| X25FLG_PSIZ | Packet size selection ( psiz_clg, psiz_cld). |
| X25FLG_WSIZ | Window size selection ( wsiz_clg, wsiz_cld). |
| X25FLG_TCLS | Throughput class required ( tcls_clg, tcls_cld). |
| X25FLG_REV_CHRG | Reverse Charge required (no corresponding field). |
| X25FLG_FASTSEL | Fast select (no corresponding field). |
| X25FLG_FASTSEL_RSP | Indicates whether a restricted response is required when the X25FLG_FASTSEL flag is also requested (no corresponding field). |
| X25FLG_CUG | Closed user group selection required ( cug_id). |
| X25FLG_OA_CUG | Closed user group with outgoing access (basic format) selection required ( cug_id). |
| X25FLG_BI_CUG | Bilateral closed user group selection required ( cug_id). |
| X25FLG_NUI_DATA | Network user identification ( nui_data). |
| X25FLG_CI_SEG_CNT | Charging information: segment count ( ci_seg_cnt). |
| X25FLG_CI_MON_UNT | Charging information: monetary unit ( ci_mon_unt). |
| X25FLG_CI_CAL_DUR | Charging information: call duration ( ci_cal_dur). |
| X25FLG_CI_REQUEST | Charging information is required (no corresponding field). |
| X25FLG_CLAMN | Called line address modified notification ( clamn). |
| X25FLG_CALL_REDR | Call redirection notification ( call_redr_addr, call_redr_reason). |
| X25FLG_TRAN_DEL | Transit delay selection and notification ( tran_del). |
| X25FLG_CALLING_ADDR_EXT | Calling address extension ( calling_addr_ext_use, calling_addr_ext). |
| X25FLG_CALLED_ADDR_EXT | Called address extension ( called_addr_ext_use, called_addr_ext). |
| X25FLG_MIN_TCLS | Quality of service negotiation: minimum throughput class ( min_tcls_clg, min_tcls_cld). |
| X25FLG_END_TO_END_DEL | Quality of service negotiation: end-to-end transit delay ( end_to_end_del). |
| X25FLG_EXP_DATA | Expedited data negotiation (no corresponding field). |
| X25FLG_FACEXT | Facilities extension: for all other facilities, including national options ( fac_ext). |
This section explains the
meanings of structure fields but not the lengths associated with individual
pointer fields.
| flags | Notification to the API that the associated field has been used. |
| fac_ext | Pointer to the facilities extension array (extra facility information
provided by the user or network). No checking is made on the validity
of this information. It allows extra facilities that the main
cb_fac structure does not include. The elements of the
fac_ext field are copied directly into the facility field.
When the information is provided by the X.25 network or by the remote data terminal equipment (DTE), it is the responsibility of the application to interpret the field. Only elements up to the first non-X.25 facility are decoded by the API. Facility markers must be used in the fac_ext field if such facilities are required. |
| psiz_clg | Indicates the requested size for packets transmitted from the calling DTE. The following are supported values: |
| psiz_cld | Requested size for packets transmitted from the called DTE. Supported values are the same as for the psiz_clg field. |
| wsiz_clg | Requested size for the window for packets transmitted by the calling DTE. Values range from 0x01 to 0x07 inclusive. |
| wsiz_cld | Requested size for the window for packets to be transmitted by the called DTE. Values range from 0x01 to 0x07 inclusive. |
| tcls_clg | Throughput class requested for data to be sent by the calling DTE. The following are supported values: |
| tcls_cld | Throughput class request for data sent from the called DTE. Supported values are the same as for the tcls_clg field. |
| rpoa_id | Indicates the requested RPOA (Requested Private Operating Agency) transit network. Each element of the array is an RPOA identifier. |
| cug_id | Indicates the identifier of a closed user group (CUG). Used for all modes of CUG and also for bilateral CUGs. |
| nui_data | Network user identification data in a format specified by the network administrator. |
| ci_seg_cnt | Charging information: segment count data. |
| ci_mon_unt | Charging information: monetary unit data. |
| ci_cal_dur | Charging information: call-duration data. |
| call_redr_addr | The address to which the call has been redirected. The address is stored in ASCIIZ format. |
| call_redr_reason | Contains reason for call redirection. |
| tran_del | Transit delay in milliseconds. |
| calling_addr_ext_use | Indicates the use of the calling address extension. |
| calling_addr_ext | Up to 40 digits containing the calling address extension. The
address extension is stored in ASCIIZ format. The following are values
for the extended calling and called address flags:
#DEFINE X25_FAC_ADDR_EXT_USE_ENTIRE_OSI_NSAP(0) #DEFINE X25_FAC_ADDR_EXT_USE_PARTIAL_OSI_NSAP(1) #DEFINE X25_FAC_ADDR_EXT_USE_NON_OSI(2) |
| called_addr_ext_use | Indicates the use of the called address extension. |
| called_addr_ext | Up to 40 digits containing the called address extension. The address extension is stored in ASCIIZ format. See the calling_addr_ext field for values. |
| clamn | Called line address modified notification. Contains the reason for redirection. |
| min_tcls_clg | Throughput class requested for data to be sent by the calling DTE. The following are supported values: |
| min_tcls_cld | Throughput class request for data sent from the called DTE. Supported values are the same as for the min_tcls_clg field. |
| end_to_end_del | Specifies cumulative requested end-to-end and maximum-acceptable transit delays. Requested end-to-end and maximum-acceptable values are optional. |
This is a simple example of the use of the cb_fac_struct structure:
/*
&
*/
struct cb_call_struct cb_call;
struct cb_fac_struct fac_struct;
u_char facilities_extension[10],facilities_extension[8];
ushort rpoa_ext_id[3] = {7,8,9};
char extended_calling_addr[]= "1234567890"; /* extension */
/* Initialize flags
*/
fac_struct.flags = 0;
/* Use of RPOAE
*/
fac_struct.rpoa_id = rpoa_ext_id;
fac_struct.rpoa_id_len = 3;
fac_struct.flags |= X25FLG_RPOA;
/* Use of extended addressing
*/
fac_struct.calling_addr_ext = extended_calling_addr;
fac_struct.flags |= X25FLG_CALLING_ADDR_EXT;
/* Use of extended facilities
*/
facilities_extension[0] = 0x00; /*
start of a Facility Marker */
facilities_extension[1] = 0x00; /*
non_X25 facility supported */
/* by
calling DTE
*/
facilities_extension[2] = 0x55; /*
a facility
*/
facilities_extension[3] = 0x66; /*
a facility
*/facilities_extension[4] = 0x00;
/* start of a Facility Marker */
facilities_extension[5] = 0xFF; /*
non_X25 facility supported */
/* by
called DTE
*/
facilities_extension[6] = 0x88; /*
a facility
*/
facilities_extension[7] = 0x99; /*
a facility
*/
strcpy(fac_struct.fac_ext, facilities_extension);
fac_struct.fac_ext_len = 8;
fac_struct.flags |= X25FLG_FACEXT;
/*****************************************************************/
/* In this example a cb_call structure
is initialized
*/
/* with a cb_fac structure.
*/
/*****************************************************************/
cb_call.cb_fac = &fac_struct;
cb_call.flags = X25FLG_CB_FAC;
The x25sdefs.h file.
The cb_call_struct structure, cb_clear_struct structure.