[ Previous | Next | Table of Contents | Index | Library Home |
Legal |
Search ]
Commands Reference, Volume 4
Replies to a message.
repl [ +Folder ] [ -draftfolder +Folder |
-nodraftfolder ] [ Message ] [ -draftmessageMessage ] [ -annotate [ -noinplace | -inplace ] | -noannotate ] [ -cc Names... ]
[ -nocc Names... ]
[ -query | -noquery ] [ -fcc +Folder ]
[ -form FormFile ]
[ -editor Editor | -noedit ] [ -format | -noformat ] [ -filter File ] [ -width Number ] [ -whatnowproc Program |
-nowhatnowproc ]
The repl command starts
an interface enabling you to compose a reply to a message. By default,
the command drafts a reply to the current message in the current
folder. If you do not specify the -draftfolder flag, or if
the Draft-Folder: entry in the
$HOME/.mh_profile file is undefined, the repl
command searches your MH directory for a draft file. If you
specify a folder, that folder becomes the current folder.
When you enter the repl
command, the system places the To:, cc:, and
In-Reply-To: fields in the draft and prompts you to enter the
text of the reply. To exit the editor, press Ctrl-D. After
exiting the editor, the repl command starts the MH
whatnow command. You can see a list of available
whatnow subcommands by pressing the Enter key at the What
now? prompt. With these subcommands, you can re-edit, list, and
send a reply, or end the processing of the repl command.
Note: A line of
dashes or a blank line must be left between the header and the body of the
message for the message to be identified when it is sent.
The repl command uses
the definitions in the /etc/mh/replcomps file to format the reply
message. You can create a replcomps file in your MH
directory or use the -form flag to define an alternate reply
format. To leave a copy of the original message in the reply message,
use the -filter flag.
To annotate the original message
with redistribution information, use the -annotate flag.
This flag annotates the original message with the Resent:
field and the current date and time. A message is annotated only if you
send the reply before you exit repl command processing.
| -annotate
| Annotates the message being replied to with the time and date of the
reply. You can use the -inplace flag to preserve links to an
annotated message.
|
| -cc Names
| Specifies the users who will be listed in the cc: field
of the reply. You can specify the following variables for
Names: all, to, cc, and
me. The default is -cc all.
|
| -draftfolder
+Folder
| Places the draft message in the specified folder. If
+Folder is not specified, then Current-Folder
is assumed.
|
| -draftmessage
Message
| Specifies the draft message. If you specify
-draftfolder without the -draftmessage flag, the default
message is new. If you specify this flag without the
-draftfolder flag, the system creates the draft in the default
file, UserMHdirectory/draft.
|
| -editor Editor
| Identifies the initial editor for composing the reply. If you do
not specify the -editor flag, the comp command selects
the default editor specified by the Editor: entry in your
$HOME/.mh_profile file.
|
| -fcc +Folder
| Places a file copy of the reply in the specified folder. If you do
not specify this flag, the repl command will not produce a file
copy.
|
| -filter File
| Reformats the message being replied to and places the reformatted message
in the body of the reply. You must specify a File variable
with this flag. The -filter flag uses the format file
acceptable to the mhl command.
|
| +Folder
| Identifies the folder that contains the message to reply to. If a
folder is not specified, then Current-Folder is used.
|
| -form FormFile
| Specifies a reply format. The repl command treats each
line in the specified format file as a format string.
|
| -format
| Removes duplicate addresses from the To:,
cc:, and Bcc: fields and standardizes these
fields using the columns specified by the -width flag. The
-format flag indicates if Internet style is to be used, which
serves as the default.
|
| -help
| Lists the command syntax, available switches (toggles), and version
information.
Note: For MH, the name of this flag must be fully spelled
out.
|
| -inplace
| Forces annotation to be done in place in order to preserve links to the
annotated message.
|
| Message
| Specifies a message. If you specify both a message to reply to and
a message draft, you must use the -draftmessge flag. Use the
following to define a message:
- Number
- Number of the message.
- cur or . (period)
- Current message. The default reply message.
- first
- First message in a folder.
- last
- Last message in a folder.
- new
- New message that is created. The default draft message is
new.
- next
- Message following the current message.
- prev
- Message preceding the current message.
|
| -noannotate
| Prevents annotation. This flag is the default.
|
| -nocc Names
| Allows you to specify the users who will not be listed in the
cc: field of the reply. You can specify the following
for Names: all, to, cc, and
me.
|
| -nodraftfolder
| Places the draft in the file
UserMhDirectory/draft.
|
| -noedit
| Suppresses the initial edit.
|
| -noformat
| Suppresses both removal of duplicate addresses from the
To:, cc:, and Bcc: fields,
and standardization of these fields.
|
| -noinplace
| Prevents annotation in place. This flag is the default.
|
| -noquery
| Automatically builds the To: and cc:
fields. This flag is the default.
|
| -nowhatnowproc
| Prevents interactive processing for the repl command.
This flag prevents editing.
|
| -query
| Queries you for permission to include each address in the
To: and cc: fields.
|
| -whatnowproc
Program
| Starts the specified command string as the program to guide you through
the reply tasks. The default is the whatnow program.
|
| -width Number
| Sets the width of the address fields. The default is 72
columns.
|
The following entries are entered
in the UserMhDirectory/.mh_profile file:
| Alternate-Mailboxes:
| Specifies the mailboxes.
|
| Current-Folder:
| Sets the default current folder.
|
| Draft-Folder:
| Sets the default folder for drafts.
|
| Editor:
| Sets the default editor.
|
| fileproc:
| Specifies the program used to refile messages.
|
| mhlproc:
| Specifies the program used to filter the message for which you are
creating a reply.
|
| Msg-Protect:
| Sets the protection level for the new message files.
|
| Path:
| Specifies the user's MH directory.
|
| whatnowproc:
| Specifies the program used to prompt What now?
questions.
|
- To reply to the current
message in the current folder, enter:
repl
The system responds with text similar to the following:
To: patrick@venus
cc: tom@thomas
Subject: Re: Meeting on Monday
In-reply-to: (Your message of Thu, 21 Jul 88 13:39:34 CST.)
<8807211839.AA01868>
--------------
You can now enter your reply. When you finish entering the body of
your reply, press the Ctrl-D key sequence to exit the editor. The
system responds with the following:
What now?
Enter send to send the reply. If you want to see a list
of subcommands, press the Enter key. In this example, you are sending a
reply to the current message in the current folder.
- To send a reply to message
4 in the inbox folder, enter:
repl +inbox 4
The system responds with a message similar to the following:
To: dawn@chaucer
cc: jay@venus
Subject: Re: Status Report
In-reply-to: (Your message of Thu, 21 Jul 88 13:39:34 CST.)
<8807211839.AA01868>
--------------
You can now enter your reply. When you finish entering the body of
your reply, press the Ctrl-D key sequence to exit the editor. The
system responds with the following:
What now?
Enter send to send the reply. If you want to see a list
of subcommands, press the Enter key.
- To keep track of your reply to
the current message in the current folder, use the -annotate flag
to place a copy of the date and time in the message you are replying to, as
follows:
repl -annotate
The system responds with a message similar to the following:
To: patrick@venus
cc: tom@thomas
Subject: Re: Meeting on Friday
In-reply-to: (Your message of Mon, 17 Apr 89 13:39:34 CST.)
<8904171839.AA01868>
--------------
You can now enter your reply. When you finish entering the body of
your reply, press the Ctrl-D key sequence to exit the editor. The
system responds with the following:
What now?
Enter send to send the reply. If you quit the editor
without sending the reply, the annotation does not occur.
| $HOME/.mh_profile
| Specifies the user's MH profile.
|
| /etc/mh/replcomps
| Contains the MH default reply template.
|
| UserMhDirectory/replcomps
| Contains the user's default reply form.
|
| /usr/bin/repl
| Contains the repl command.
|
| UserMhDirectory/draft
| Contains the current message draft.
|
The anno command, comp command, dist command, forw command, mhl command, send command, whatnow command.
The mh_alias file format, mh_profile file format.
Mail Overview
in AIX 5L Version 5.1 System User's Guide:
Communications and Networks.
[ Previous | Next | Table of Contents | Index |
Library Home |
Legal |
Search ]