[ Previous | Next | Table of Contents | Index | Library Home |
Legal |
Search ]
Commands Reference, Volume 4
Adds a QoS (Quality of Service) Service Category or Policy Rule.
To add a Service Category:
qosadd [ -s
ServiceCategory] [ -t
OutgoingTOS] [ -b
MaxTokenBucket] [ -f
FlowServiceType] [ -m
MaxRate] service
To add a Policy Rule:
qosadd [ -s
ServiceCategory] [ -r
ServicePolicyRules] [ -l
PolicyRulePriority] [ -n
ProtocolNumber] [ -A
SrcAddrRange] [ -a
DestAddrRange] [ -P
SrcPortRange] [ -p
DestPortRange] policy
The qosadd command adds the specified Service Category or Policy
Rule entry in the policyd.conf file and installs the changes
in the QoS Manager.
Flags with service add:
| -s
| The name of the ServiceCategory attribute, which is
mandatory.
|
| -t
| The OutgoingTOS attribute, specified as an 8 bit binary
number.
|
| -b
| The MaxTokenBucket attribute, specified in Kb
(Kilobits).
|
| -f
| The FlowServiceType attribute, which is ControlledLoad or
Guaranteed.
|
| -m
| The MaxRate attribute, which is specified in Kbps (Kilobits
per second).
|
Flags with policy add:
| -s
| The name of the ServiceCategory attribute, which is
mandatory.
|
| -r
| The name of the ServicePolicyRules attribute, which is
mandatory.
|
| -l
| The PolicyRulePriority attribute, which is a positive
integer.
|
| -n
| The ProtocolNumber attribute, which is defined in the
/etc/protocols file.
|
| -A
| The SrcAddrRange attribute, which is the Source IP address
range from a1 to a2 where a2 >= a1.
|
| -a
| The DestAddrRange attribute, which is the Destination IP
address range from i1 to i2 where i2 >= i1.
|
| -P
| The SrcPortRange attribute, which is the Source Port range
from a1 to a2 where a2 >= a1.
|
| -p
| The DestPortRange attribute, which is the Destination Port
range from i1 to i2 where i2 >= i1.
|
| 0
| Successful completion
|
| Positive Integer
| An error occurred.
|
- To add the sc01 service, type:
qosadd -s sc01 -t 10000001 -b 81 -f ControlledLoad -m 41 service
- To add the pr01 policy, type:
qosadd -s sc01 -r pr01 -l 2 -n 17 -A 9.3.25.1-9.3.25.10 -a 9.3.25.33-9.3.25.33 -p 9001-9010 -P 9000-9000 policy
- To add the sc02 service, type:
qosadd -s sc02 -t 10000001 -b 81 service
- To add the pr02 policy, type:
qosadd -s sc02 -r pr02 -l 2 -n 17 policy
The qosstat command, qosmod command, qosremove command, qoslist command.
[ Previous | Next | Table of Contents | Index |
Library Home |
Legal |
Search ]