The SMGate daemon can only be enabled after the server's private key ring has been installed.
To enable SMGate, type the following command:
/usr/websm/bin/wsmserver -enablehttps
This command starts SMGate and adds an entry to the /etc/inittab file so that it is automatically activated when the system is restarted. The default port for SMGate is 9092. Examine the /etc/services file to make sure this port is not being used by another service. You can configure SMGate to use a different port by typing:
/usr/websm/bin/wsmserver -enablehttps port
where port is the port number you want it to use.
If you change the server's security configuration, you must disable SMGate. Disable SMGate by typing:
/usr/websm/bin/wsmserver -disablehttps
To configure the browser to work through SMGate, see Configuring for the SMGate Daemon.