[ Previous | Next | Contents | Glossary | Home | Search ]
Motif and CDE 2.1 Style Guide Certification Checklist

Touch Swipe Technique

[ ]
Support use of the touch swipe technique only when discontiguous selections are allowed.

[ ]
After a mouse-based touch swipe technique is used:

  1. Define the current selection region to consist of the elements touched.

  2. If one or more elements are touched, identify the anchor element to be the first element touched.

    3. [ ]
    After a mouse-based touch swipe technique is used, place the active cursor on one of the following:

    1. If it is a graphics cursor, at the point at which the SELECT button is released

    2. If one or more elements are touched, on the last element touched

    3. On the currently cursored element in the selection scope

      4. [ ]
      When the user is using the touch swipe technique in select mode:

      1. Select all the elements touched.

      2. Deselect all other elements in the scope.

        3. [ ]
        If currently in select mode, when the user operates the area swipe technique by pressing Ctrl SELECT in place of SELECT, continue as if toggle mode were in use.

        [ ]
        When the user is using the area swipe technique in toggle mode:

        1. Toggle all elements touched, based on the toggling policy.

        2. Do not change the selection state of the other elements.

          3. [ Previous | Next | Contents | Glossary | Home | Search ]