Sense Data consists of failure data analyzed by the diagnostic programs. The following sense data applies to all the error log entries related to the Serial Optical Link device driver.
For more information on Serial Optical Link error log entries, refer to "SLA Error Identifiers for the Error Log" in AIX Problem Solving Guide and Reference.
0x80000000 | Receive buffer check |
0x40000000 | Transmit buffer check |
0x20000000 | Command check |
0x10000000 | Synch cmd reject |
0x08000000 | Reserved bit 4 |
0x04000000 | Tag parity check |
0x02000000 | Buffer parity check |
0x01000000 | Storage access check |
0x00800000 | Reset received |
0x00400000 | Send count error |
0x00200000 | Address mismatch |
0x00100000 | Reserved bit 11 |
0x00080000 | Signal failure |
0x00040000 | Transmit driver fault |
0x00020000 | Reserved bit 14 |
0x00010000 | Reserved bit 15 |
0x00008000 | Reserved bit 16 |
0x00004000 | Reserved bit 17 |
0x00002000 | Reserved bit 18 |
0x00001000 | Reserved bit 19 |
0x00000800 | Reserved bit 20 |
0x00000400 | Reserved bit 21 |
0x00000200 | Reserved bit 22 |
0x00000100 | Reserved bit 23 |
0x00000080 | Reserved bit 24 |
0x00000040 | OLS received |
0x00000020 | NOS received |
0x00000010 | UD received |
0x00000008 | UDR received |
0x00000004 | Reserved bit 29 |
0x00000002 | Signal error |
0x00000001 | No optics card |
Status Blocks for the Serial Optical Link Device Driver.
SLA Error Identifiers for the Error Log in AIX Problem Solving Guide and Reference.