[ Previous |
AIX Version 4.3 General Programming Concepts: Writing and Debugging Programs
Adding Tasks to the SMIT Database
When developing new objects for the System Management Interface Tool (SMIT) database, it is recommended that you set up a separate test database for development.
To create a test database, do the following:
- Create a directory for testing use. For example, the following command creates a /home/smit/test
mkdir /home/smit /home/smit/test
- Make the test directory the current directory:
- Define the test directory as the default object repository by setting the ODMDIR environment variable to . (the current directory):
- Create a new SMIT database in the test directory:
cp /etc/objrepos/sm_* $ODMDIR
To add tasks to the SMIT database:
- Design the dialog for the command you want SMIT to build.
- Design the hierarchy of menus and, optionally, of selectors needed to get a SMIT user to the dialog, and determine where and how this hierarchy should be linked into the existing SMIT database. The following strategy may save you time if you are developing SMIT database extensions for the first time:
- Start SMIT (run the smit command), look for existing menu, selector, and dialog screens that perform tasks similar to the one you want to add, and find the menu screen(s) to which you will add the new task.
- Exit from SMIT, then remove the existing SMIT log file. Instead of removing the log file, you can use the -l flag of the smit command to specify a different log file when starting SMIT in the following step. This enables you to isolate the trace output of your next SMIT session.
- Start SMIT again with the -t command flags and again look at the screen to which you will add the new task. This logs the object IDs accessed for each screen for the next step.
- Look at the SMIT log file to determine the ID for each object class used as part of the menu(s).
- Use the object class IDs with the odmget command to retrieve the stanzas for these objects. The stanzas can be used as rough examples to guide your implementation and to learn from the experience of others.
- Look in the SMIT log file for the command strings used when running through the screens to see if special tools are being utilized (such as sed or awk scripts, ksh shell functions, environment variable assignment, and so on). When entering command strings, keep in mind that they are processed twice: the first time by the odmadd command and the second time by the ksh shell. Be careful when using special escape meta-characters such as \
or quotation characters ('
). Note also that the output of the odmget command does not always match the input to the odmadd command, especially when these characters or multiline string values are used.
- Code the dialog, menu, and selector objects by defining them in the ASCII object stanza file format required by the odmadd command. For examples of stanzas used to code SMIT objects, see "SMIT Screen Types".
- Add the dialog, menu, and selector objects to the SMIT test database with the odmadd command, using the name of your ASCII object stanza file in place of test_stanzas
- Test and debug your additions by running SMIT using the local test database:
"Debugging SMIT Database Extensions" discusses how to test and debug additions to SMIT.
When you are finished testing, restore the /usr/lib/objrepos directory as the default object repository by setting the ODMDIR environment variable to /usr/lib/objrepos:
System Management Interface Tool (SMIT) Overview for Programmers.
For more information about programming SMIT, see Understanding SMIT Screen Types, Understanding SMIT Object Classes, Understanding SMIT Aliases and FastPaths, Understanding SMIT Information Command Descriptors, and Understanding SMIT Command Generation and Execution.
Debugging SMIT Database Extensions and Creating SMIT Help Information for a NewTask.
See the Message Facility Overview for Programming for information on how to create a message file.
The odmadd command, odmcreate command, odmget command, smit command.
[ Previous |