IBM Books

Diagnosis Guide


SP-specific LED/LCD values

LED and LCD values generated by the SP system and Parallel System Support Programs are of two types: those that convey information and signal status, or those that indicate a problem. These are the PSSP-specific LED/LCD Values, generated during the NIM installation of the node. This list is displayed in chronological order, or the order in which the they occur during processing.

Note:
Some nodes have LED/LCD values that are of the form uxx, while others have LED/LCD values of the form 0axx. They are equivalent. If your node has a value of 0axx, look it up in the following tables as if it was uxx.

For an LED/LCD not in this table, see Other LED/LCD codes.

Table 84. SP-specific LED/LCD values (Chronological order)

u20
Create log directory (enter function create_directories).

u21
Establish working environment (enter function setup_environment).

u03
Get the node.install_info file from the master.

u04
Expand node.install_info file.

u22
Configure node (enter function configure_node).

u57
Get the node.config_info file from the master.

u59
Get the cuat.sp template from the master.

u23
Create/update /etc/ssp files (enter function create_files).

u60
Create/update /etc/ssp files.

u24
Update /etc/hosts file (enter function update_etchosts).

u25
Get configuration files (enter function get_files).

u61
Get /etc/SDR_dest_info from boot/install server.

u79
Get script.cust from boot/install server.

u50
Get tuning.cust from boot/install server.

u54
Get spfbcheck from boot/install server.

u56
Get psspfb_script from boot/install server.

u58
Get psspfb_script from control workstation.

u27
Update /etc/inittab file (enter function update_etcinittab).

u28
Perform MP-specific functions (enter function upmp_work).

u52
Processor is "MP".

u51
Processor is "UP".

u55
Fatal error in bosboot.

u29
Install prerequisite file sets (enter function install_prereqs).

u30
Install ssp.clients (enter function install_ssp_clients).

u80
Mount lppsource and install ssp.clients.

u31
Install ssp.basic (enter function install_ssp_basic).

u81
Install ssp.basic.

u32
Install ssp.ha (enter function install_ssp_ha).

u53
Install ssp.ha.

u33
Install ssp.sysctl (enter function install_ssp_sysctl).

u82
Install ssp.sysctl.

u34
Install ssp.pman (enter function install_ssp_pman).

u41
Configure switch (enter function config_switch).

u35
Install ssp.css (enter function install_ssp_css).

u84
Install ssp.css.

u36
Install ssp.jm (enter function install_ssp_jm).

u85
Install ssp.jm.

u37
Delete master .rhosts entry (enter function delete_master_rhosts).

u38
Create new dump logical volume (enter function create_dump_lv).

u86
Create new dump logical volume.

u39
Run customer's tuning.cust (enter function run_tuning_cust).

u40
Run customer's script.cust (enter function run_script_cust).

u87
Run customer's script.cust script file.

u26
Get authentication files (enter function authent_stuff).

u67
Get /etc/krb.conf from boot/install server.

u68
Get /etc/krb.realms from boot/install server.

u69
Get krb-srvtab from boot/install server.

u42
Run psspfb_script (enter function run_psspfb_script).

u46
/tftpboot/tuning.cust is being run during node customization.

The following list contains the same PSSP LEDs/LCDs as in the previous list, but sorted numerically for reference use:

Table 85. SP-Specific LED/LCD values (Numerical order)

u03
Get the node.install_info file from the master.

u04
Expand node.install_info file.

u20
Create log directory (enter function create_directories).

u21
Establish working environment (enter function setup_environment).

u22
Configure node (enter function configure_node).

u23
Create/update /etc/ssp files (enter function create_files).

u24
Update /etc/hosts file (enter function update_etchosts).

u25
Get configuration files (enter function get_files).

u26
Get authentication files (enter function authent_stuff).

u27
Update /etc/inittab file (enter function update_etcinittab).

u28
Perform MP-specific functions (enter function upmp_work).

u29
Install prerequisite file sets (enter function install_prereqs).

u30
Install ssp.clients (enter function install_ssp_clients).

u31
Install ssp.basic (enter function install_ssp_basic).

u32
Install ssp.ha (enter function install_ssp_ha).

u33
Install ssp.sysctl (enter function install_ssp_sysctl).

u34
Install ssp.pman (enter function install_ssp_pman).

u35
Install ssp.css (enter function install_ssp_css).

u36
Install ssp.jm (enter function install_ssp_jm).

u37
Delete master .rhosts entry (enter function delete_master_rhosts).

u38
Create new dump logical volume (enter function create_dump_lv).

u39
Run customer's tuning.cust (enter function run_tuning_cust).

u40
Run customer's script.cust (enter function run_script_cust).

u41
Configure switch (enter function config_switch).

u42
Run psspfb_script (enter function run_psspfb_script).

u46
/tftpboot/tuning.cust is being run during node customization.

u50
Get tuning.cust from boot/install server.

u51
Processor is "UP".

u52
Processor is "MP".

u53
Install ssp.ha.

u54
Get spfbcheck from boot/install server.

u55
Fatal error in bosboot.

u56
Get psspfb_script from boot/install server.

u58
Get psspfb_script from control workstation.

u57
Get the node.config_info file from the master.

u59
Get the cuat.sp template from the master.

u60
Create/update /etc/ssp files.

u61
Get /etc/SDR_dest_info from boot/install server.

u67
Get /etc/krb.conf from boot/install server.

u68
Get /etc/krb.realms from boot/install server.

u69
Get krb-srvtab from boot/install server.

u79
Get script.cust from boot/install server.

u80
Mount lppsource and install ssp.clients.

u81
Install ssp.basic.

u82
Install ssp.sysctl.

u84
Install ssp.css.

u85
Install ssp.jm.

u86
Create new dump logical volume.

u87
Run customer's script.cust script file.

The following LEDs/LCDs are produced after NIM installation has occurred, and during the initial post-installation reboot of the node. This list is sorted chronologically, or in the order of which the LEDs/LCDs occur during processing.

u90
Setup working environment (enter function setup_environment).

u91
Unconfiguring any adapters left over from the mksysb.

u89
Cleans up and unconfigures DCE from mksysb and removes key files and sysctl acls.

u92
Configure adapters (enter function config_adapters).

u93
Configure inet0 (enter function config_inet0).

u94
Run cfgmgr (enter function run_cfgmgr).

u99
Set CLOCAL flag on tty0

u95
Run complete_node on boot/install server (enter function complete_node).

u78
Set the KRBTKFILE variable and get an rcmd ticket.

u96
Run customer's firstboot.cust (enter function run_firstboot_cust).

The following list contains the same LEDs/LCDs as in the previous list, but sorted numerically for reference use:

u78
Set the KRBTKFILE variable and get an rcmd ticket.

u89
Cleans up and unconfigures DCE from mksysb and removes key files and sysctl acls.

u90
Setup working environment (enter function setup_environment).

u91
Unconfiguring any adapters left over from the mksysb.

u92
Configure adapters (enter function config_adapters).

u93
Configure inet0 (enter function config_inet0).

u94
Run cfgmgr (enter function run_cfgmgr).

u95
Run complete_node on boot/install server (enter function complete_node).

u96
Run customer's firstboot.cust (enter function run_firstboot_cust).

u99
Set CLOCAL flag on tty0

The following LEDs/LCDs occur during a node IPL.

762
SP Switch Adapter configuring on node

763
SP Switch MX Adapter configuring on node

764
RS/6000 SP System Attachment Adapter configuring on node


[ Top of Page | Previous Page | Next Page | Table of Contents | Index ]